Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser !
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namemps-v2-20-10/plato.asu.edu/pub/unibo/normalized-mps-v2-20-10-core2536-691.opb
MD5SUM127ff6a7c180d4ca2c922cfd5e8d4802
Bench Categoryoptimization, big integers (OPTBIGINT)
Has Objective FunctionYES
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 939008000000000
Optimality of the best value was proved NO
Number of terms in the objective function 15554
Biggest coefficient in the objective function 53687091200000000000
Number of bits for the biggest coefficient in the objective function 66
Sum of the numbers in the objective function 215744503004511174656
Number of bits of the sum of numbers in the objective function 68
Biggest number in a constraint 10240000000000000000000
Number of bits of the biggest number in a constraint 74
Biggest sum of numbers in a constraint 10455744503004511862784
Number of bits of the biggest sum of numbers74
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark1203.88
Number of variables15554
Total number of constraints17823
Number of constraints which are clauses2536
Number of constraints which are cardinality constraints (but not clauses)15286
Number of constraints which are nor clauses,nor cardinality constraints1
Minimum length of a constraint1
Maximum length of a constraint15554

Trace number 8285

Launcher Data

LAUNCH ON wulflinc4 THE 2005-09-20 16:21:12 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=5469 boxname=wulflinc4 idbench=781 idsolver=5 numberseed=0
MD5SUM SOLVER: 104a539e9cf344a86ca96d2c957e7d7f  /oldhome/oroussel/solvers/Pueblo
MD5SUM BENCH:  127ff6a7c180d4ca2c922cfd5e8d4802  /oldhome/oroussel/tmp/wulflinc4/normalized-mps-v2-20-10-core2536-691.opb
REAL COMMAND:  Pueblo
IDLAUNCH: 5469
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.169
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 890.88

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.169
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        813028 kB
Buffers:         34340 kB
Cached:         160216 kB
SwapCached:        876 kB
Active:         104504 kB
Inactive:        92632 kB
HighTotal:      131008 kB
HighFree:          280 kB
LowTotal:       903652 kB
LowFree:        812748 kB
SwapTotal:     2097136 kB
SwapFree:      2095644 kB
Dirty:              28 kB
Writeback:           0 kB
Mapped:           5544 kB
Slab:            18836 kB
Committed_AS:    72364 kB
PageTables:        328 kB
VmallocTotal:   114680 kB
VmallocUsed:      1388 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-09-20 16:21:12 (client local time) WITH STATUS 0 IN 0.235963 SECONDS
stats: 5469 7 0.235963 0

Solver Data

c Pueblo version 1.3 (July 2005)
c Developed @ University of Michigan, Ann Arbor, MI
c  by Hossein Sheini
c 30594: numeric constant `1024000000000' out of range (2147483647)
s UNKNOWN

Watcher Data

Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing Stack size limit: 67108864 bytes
Enforcing memory limit (will send SIGTERM then SIGKILL): 921600 Kb
Enforcing VSIZE limit: 994918400 bytes
Current StackSize limit: 67108864 bytes
Raw data (/proc/15197/stat): 15197 (Pueblo) R 15196 15197 6847 0 -1 0 19 0 0 0 0 0 0 0 23 0 1 0 1801693289 167936 3 4294967295 134512640 134578447 3221224624 3221224624 1073744960 0 0 5 0 0 0 0 17 0 0 0
Raw data (/proc/15197/statm): 41 3 40 18 0 23 0
[pid=15197] vsize: 164
open syscall for file /etc/ld.so.preload
open syscall for file tls/i686/mmx/libstdc++.so.5
open syscall for file tls/i686/libstdc++.so.5
open syscall for file tls/mmx/libstdc++.so.5
open syscall for file tls/libstdc++.so.5
open syscall for file i686/mmx/libstdc++.so.5
open syscall for file i686/libstdc++.so.5
open syscall for file mmx/libstdc++.so.5
open syscall for file libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/libstdc++.so.5
open syscall for file /etc/ld.so.cache
open syscall for file /usr/lib/libstdc++.so.5
open syscall for file tls/i686/mmx/libm.so.6
open syscall for file tls/i686/libm.so.6
open syscall for file tls/mmx/libm.so.6
open syscall for file tls/libm.so.6
open syscall for file i686/mmx/libm.so.6
open syscall for file i686/libm.so.6
open syscall for file mmx/libm.so.6
open syscall for file libm.so.6
open syscall for file /oldhome/oroussel/lib/libm.so.6
open syscall for file /lib/tls/libm.so.6
open syscall for file tls/i686/mmx/libgcc_s.so.1
open syscall for file tls/i686/libgcc_s.so.1
open syscall for file tls/mmx/libgcc_s.so.1
open syscall for file tls/libgcc_s.so.1
open syscall for file i686/mmx/libgcc_s.so.1
open syscall for file i686/libgcc_s.so.1
open syscall for file mmx/libgcc_s.so.1
open syscall for file libgcc_s.so.1
open syscall for file /oldhome/oroussel/lib/libgcc_s.so.1
open syscall for file /lib/libgcc_s.so.1
open syscall for file tls/i686/mmx/libc.so.6
open syscall for file tls/i686/libc.so.6
open syscall for file tls/mmx/libc.so.6
open syscall for file tls/libc.so.6
open syscall for file i686/mmx/libc.so.6
open syscall for file i686/libc.so.6
open syscall for file mmx/libc.so.6
open syscall for file libc.so.6
open syscall for file /oldhome/oroussel/lib/libc.so.6
open syscall for file /lib/tls/libc.so.6
One traced child (pid=15197) exited with status: 0
All traced children have exited ! Game is over.

Child status: 0
Real time (s): 0.248933
CPU time (s): 0.235963
CPU user time (s): 0.221966
CPU system time (s): 0.013997
CPU usage (%): 94.7898
Max. virtual memory (cumulated for all children) (Kb): 0

Verifier Data

ERROR: no interpretation found !