Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser !
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namesubmitted/aloul/FPGA_SAT05/normalized-fpga15_13_sat_pb.cnf.cr.opb
MD5SUM4b4e9c4dea51b53ba8323ee6782645f0
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 0
Optimality of the best value was proved NO
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 16
Number of bits of the biggest sum of numbers5
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.05899
Number of variables293
Total number of constraints236
Number of constraints which are clauses208
Number of constraints which are cardinality constraints (but not clauses)28
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint7
Maximum length of a constraint15

Trace number 7550

Launcher Data

LAUNCH ON wulflinc30 THE 2005-09-20 13:15:41 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=4722 boxname=wulflinc30 idbench=34 idsolver=5 numberseed=0
MD5SUM SOLVER: 104a539e9cf344a86ca96d2c957e7d7f  /oldhome/oroussel/solvers/Pueblo
MD5SUM BENCH:  4b4e9c4dea51b53ba8323ee6782645f0  /oldhome/oroussel/tmp/wulflinc30/normalized-fpga15_13_sat_pb.cnf.cr.opb
REAL COMMAND:  Pueblo
IDLAUNCH: 4722
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.072
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.072
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 901.12

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        848604 kB
Buffers:         34388 kB
Cached:         122316 kB
SwapCached:        784 kB
Active:          80452 kB
Inactive:        78920 kB
HighTotal:      131008 kB
HighFree:        19040 kB
LowTotal:       903652 kB
LowFree:        829564 kB
SwapTotal:     2097892 kB
SwapFree:      2096640 kB
Dirty:               0 kB
Writeback:           0 kB
Mapped:           5792 kB
Slab:            21052 kB
Committed_AS:    64308 kB
PageTables:        332 kB
VmallocTotal:   114680 kB
VmallocUsed:      1368 kB
VmallocChunk:   113252 kB
JOB ENDED THE 2005-09-20 13:15:41 (client local time) WITH STATUS 10 IN 0.05899 SECONDS
stats: 4722 0 0.05899 10

Solver Data

c Pueblo version 1.3 (July 2005)
c Developed @ University of Michigan, Ann Arbor, MI
c  by Hossein Sheini
c starting to Solve
c #variables read: 293 - #constraints read: 236
c total time              : 0.05 s
s SATISFIABLE
v -v22 -v232 -v233 -v234 -v235 -v236 -v237 -v67 -v145 -v252 -v253 -v254 -v255 -v256 -v257 -v258 -v32 -v202 -v203 -v204 -v205 -v206 v207 v2 -v65 -v220 -v221 -v222 -v223 v224 -v225 -v177 -v266 -v267 -v268 -v269 -v270 -v271 v272 -v9 -v245 -v246 -v247 -v248 -v249 v250 -v251 -v77 -v158 -v238 -v239 -v240 -v241 v242 -v243 -v244 -v106 -v196 -v197 -v198 v199 -v200 -v201 -v15 -v287 -v288 -v289 v290 -v291 -v292 -v293 -v115 -v51 -v226 -v227 v228 -v229 -v230 -v231 -v87 -v185 -v172 -v21 -v131 -v259 -v260 v261 -v262 -v263 -v264 -v265 -v98 -v134 -v280 v281 -v282 -v283 -v284 -v285 -v286 -v58 v273 -v274 -v275 -v276 -v277 -v278 -v279 -v91 -v3 v208 -v209 -v210 -v211 -v212 -v213 -v140 -v112 -v52 -v133 -v192 -v142 -v33 -v149 -v103 -v104 -v82 -v13 -v55 -v95 -v10 -v110 -v109 -v214 v215 -v216 -v217 -v218 -v219 -v83 -v117 -v121 -v122 -v123 -v124 v125 -v126 -v127 -v128 -v129 -v130 -v132 -v135 -v19 v60 -v107 v108 -v111 -v113 -v114 -v116 -v118 -v119 -v120 -v188 -v59 -v150 -v138 v71 -v61 -v62 -v63 -v64 -v66 -v68 -v69 -v70 -v72 -v73 -v74 -v75 -v147 -v180 -v20 -v181 -v182 -v183 -v184 v186 -v187 -v189 -v190 -v191 -v193 -v194 -v195 -v50 -v90 -v17 -v46 -v161 -v97 -v1 -v4 -v5 -v6 -v7 -v8 -v11 -v12 -v14 -v92 -v152 -v44 -v85 -v89 -v86 -v164 -v170 -v171 -v169 -v16 -v173 -v159 -v84 -v37 -v29 -v174 -v23 -v136 -v163 v144 -v28 -v48 -v178 -v24 -v148 -v26 -v56 -v18 -v25 v27 -v30 -v47 -v162 -v99 -v96 -v41 -v42 v151 -v153 -v154 -v155 -v156 -v157 -v160 -v165 -v176 -v57 -v93 v94 -v100 -v101 -v102 -v105 v38 -v43 -v166 -v167 -v168 -v175 v179 -v39 -v49 -v76 -v79 -v31 -v35 -v40 -v36 -v54 -v78 -v80 v88 -v143 -v45 -v81 -v139 -v53 -v137 -v146 -v34 -v141 

Watcher Data

Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing Stack size limit: 67108864 bytes
Enforcing memory limit (will send SIGTERM then SIGKILL): 921600 Kb
Enforcing VSIZE limit: 994918400 bytes
Current StackSize limit: 67108864 bytes
Raw data (/proc/7506/stat): 7506 (Pueblo) R 7505 7506 5245 0 -1 0 19 0 0 0 0 0 0 0 21 0 1 0 1858809370 167936 3 4294967295 134512640 134578447 3221224624 3221224624 1073744960 0 0 5 0 0 0 0 17 1 0 0
Raw data (/proc/7506/statm): 41 3 40 18 0 23 0
[pid=7506] vsize: 164
open syscall for file /etc/ld.so.preload
open syscall for file tls/i686/mmx/libstdc++.so.5
open syscall for file tls/i686/libstdc++.so.5
open syscall for file tls/mmx/libstdc++.so.5
open syscall for file tls/libstdc++.so.5
open syscall for file i686/mmx/libstdc++.so.5
open syscall for file i686/libstdc++.so.5
open syscall for file mmx/libstdc++.so.5
open syscall for file libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/libstdc++.so.5
open syscall for file /etc/ld.so.cache
open syscall for file /usr/lib/libstdc++.so.5
open syscall for file tls/i686/mmx/libm.so.6
open syscall for file tls/i686/libm.so.6
open syscall for file tls/mmx/libm.so.6
open syscall for file tls/libm.so.6
open syscall for file i686/mmx/libm.so.6
open syscall for file i686/libm.so.6
open syscall for file mmx/libm.so.6
open syscall for file libm.so.6
open syscall for file /oldhome/oroussel/lib/libm.so.6
open syscall for file /lib/tls/libm.so.6
open syscall for file tls/i686/mmx/libgcc_s.so.1
open syscall for file tls/i686/libgcc_s.so.1
open syscall for file tls/mmx/libgcc_s.so.1
open syscall for file tls/libgcc_s.so.1
open syscall for file i686/mmx/libgcc_s.so.1
open syscall for file i686/libgcc_s.so.1
open syscall for file mmx/libgcc_s.so.1
open syscall for file libgcc_s.so.1
open syscall for file /oldhome/oroussel/lib/libgcc_s.so.1
open syscall for file /lib/libgcc_s.so.1
open syscall for file tls/i686/mmx/libc.so.6
open syscall for file tls/i686/libc.so.6
open syscall for file tls/mmx/libc.so.6
open syscall for file tls/libc.so.6
open syscall for file i686/mmx/libc.so.6
open syscall for file i686/libc.so.6
open syscall for file mmx/libc.so.6
open syscall for file libc.so.6
open syscall for file /oldhome/oroussel/lib/libc.so.6
open syscall for file /lib/tls/libc.so.6
One traced child (pid=7506) exited with status: 10
All traced children have exited ! Game is over.

Child status: 10
Real time (s): 0.073679
CPU time (s): 0.05899
CPU user time (s): 0.046992
CPU system time (s): 0.011998
CPU usage (%): 80.0635
Max. virtual memory (cumulated for all children) (Kb): 0

Verifier Data

Verifier:	OK	0