Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser !
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namesubmitted/aloul/FPGA_SAT05/normalized-fpga14_13_sat_pb.cnf.cr.opb
MD5SUM6c5be32f385b6b14a9d33e85ff7013ea
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 0
Optimality of the best value was proved NO
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 15
Number of bits of the biggest sum of numbers4
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.092985
Number of variables273
Total number of constraints222
Number of constraints which are clauses195
Number of constraints which are cardinality constraints (but not clauses)27
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint7
Maximum length of a constraint14

Trace number 7549

Launcher Data

LAUNCH ON wulflinc15 THE 2005-09-20 13:15:41 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=4720 boxname=wulflinc15 idbench=32 idsolver=5 numberseed=0
MD5SUM SOLVER: 104a539e9cf344a86ca96d2c957e7d7f  /oldhome/oroussel/solvers/Pueblo
MD5SUM BENCH:  6c5be32f385b6b14a9d33e85ff7013ea  /oldhome/oroussel/tmp/wulflinc15/normalized-fpga14_13_sat_pb.cnf.cr.opb
REAL COMMAND:  Pueblo
IDLAUNCH: 4720
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 450.999
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 890.88

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 450.999
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        830504 kB
Buffers:         29880 kB
Cached:         145088 kB
SwapCached:        744 kB
Active:          65368 kB
Inactive:       112256 kB
HighTotal:      131008 kB
HighFree:         4956 kB
LowTotal:       903652 kB
LowFree:        825548 kB
SwapTotal:     2097136 kB
SwapFree:      2095884 kB
Dirty:               0 kB
Writeback:           0 kB
Mapped:           5732 kB
Slab:            20932 kB
Committed_AS:    64144 kB
PageTables:        328 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-09-20 13:15:41 (client local time) WITH STATUS 10 IN 0.092985 SECONDS
stats: 4720 0 0.092985 10

Solver Data

c Pueblo version 1.3 (July 2005)
c Developed @ University of Michigan, Ann Arbor, MI
c  by Hossein Sheini
c starting to Solve
c #variables read: 273 - #constraints read: 222
c total time              : 0.08 s
s SATISFIABLE
v -v164 -v239 -v240 -v241 -v242 -v243 -v244 v245 -v16 -v189 -v190 -v191 -v192 -v193 v194 -v145 -v207 -v208 -v209 -v210 -v211 -v212 -v84 -v267 -v268 -v269 -v270 -v271 v272 -v273 -v101 -v195 -v196 v197 -v198 -v199 -v200 -v42 -v7 -v219 -v220 -v221 -v222 v223 -v224 -v27 -v260 -v261 -v262 -v263 v264 -v265 -v266 -v17 -v132 -v213 -v214 -v215 v216 -v217 -v218 v127 -v183 v184 -v185 -v186 -v187 -v188 -v121 -v232 -v233 -v234 v235 -v236 -v237 -v238 -v182 v44 -v54 -v253 -v254 v255 -v256 -v257 -v258 -v259 -v173 -v91 -v142 -v22 -v225 v226 -v227 -v228 -v229 -v230 -v231 -v136 -v126 -v120 v111 -v96 -v15 -v18 -v19 -v20 -v21 -v23 v24 -v25 -v26 -v28 -v141 -v161 -v153 -v122 -v51 -v3 -v109 v246 -v247 -v248 -v249 -v250 -v251 -v252 -v65 v201 -v202 -v203 -v204 -v205 -v206 -v76 v118 -v63 -v169 -v144 -v129 -v55 -v174 -v133 -v113 -v114 -v115 -v116 -v117 -v119 -v123 -v124 -v125 -v74 -v85 -v86 -v87 -v88 -v89 -v90 -v92 -v93 -v94 v95 -v97 -v98 -v70 -v29 v162 -v140 -v67 -v10 -v43 -v45 -v46 -v47 -v48 -v49 -v50 -v52 -v53 -v56 -v58 -v180 -v4 -v11 -v82 -v66 -v99 -v100 -v102 -v103 -v104 -v105 -v106 -v107 -v108 -v110 -v112 -v159 -v155 -v77 -v59 -v38 -v143 v14 v73 -v79 -v181 -v156 -v157 -v158 -v160 -v163 -v165 -v166 -v167 -v168 -v62 -v35 -v72 -v154 -v130 -v2 -v5 v147 -v170 -v171 -v172 -v175 -v176 v177 -v178 -v179 -v30 -v36 -v57 -v1 -v6 -v8 -v9 -v12 -v13 -v69 -v137 -v37 -v80 -v151 -v39 -v32 -v31 -v33 -v34 v40 -v41 -v128 -v146 -v71 -v61 -v83 -v148 -v149 -v150 -v152 -v134 v60 -v64 -v68 -v131 -v135 -v138 -v139 -v81 -v78 -v75

Watcher Data

Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing Stack size limit: 67108864 bytes
Enforcing memory limit (will send SIGTERM then SIGKILL): 921600 Kb
Enforcing VSIZE limit: 994918400 bytes
Current StackSize limit: 67108864 bytes
Raw data (/proc/11171/stat): 11171 (Pueblo) R 11170 11171 31778 0 -1 0 19 0 0 0 0 0 0 0 21 0 1 0 1800584699 167936 3 4294967295 134512640 134578447 3221224624 3221224624 1073744960 0 0 5 0 0 0 0 17 1 0 0
Raw data (/proc/11171/statm): 41 3 40 18 0 23 0
[pid=11171] vsize: 164
open syscall for file /etc/ld.so.preload
open syscall for file tls/i686/mmx/libstdc++.so.5
open syscall for file tls/i686/libstdc++.so.5
open syscall for file tls/mmx/libstdc++.so.5
open syscall for file tls/libstdc++.so.5
open syscall for file i686/mmx/libstdc++.so.5
open syscall for file i686/libstdc++.so.5
open syscall for file mmx/libstdc++.so.5
open syscall for file libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/tls/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/i686/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/mmx/libstdc++.so.5
open syscall for file /oldhome/oroussel/lib/libstdc++.so.5
open syscall for file /etc/ld.so.cache
open syscall for file /usr/lib/libstdc++.so.5
open syscall for file tls/i686/mmx/libm.so.6
open syscall for file tls/i686/libm.so.6
open syscall for file tls/mmx/libm.so.6
open syscall for file tls/libm.so.6
open syscall for file i686/mmx/libm.so.6
open syscall for file i686/libm.so.6
open syscall for file mmx/libm.so.6
open syscall for file libm.so.6
open syscall for file /oldhome/oroussel/lib/libm.so.6
open syscall for file /lib/tls/libm.so.6
open syscall for file tls/i686/mmx/libgcc_s.so.1
open syscall for file tls/i686/libgcc_s.so.1
open syscall for file tls/mmx/libgcc_s.so.1
open syscall for file tls/libgcc_s.so.1
open syscall for file i686/mmx/libgcc_s.so.1
open syscall for file i686/libgcc_s.so.1
open syscall for file mmx/libgcc_s.so.1
open syscall for file libgcc_s.so.1
open syscall for file /oldhome/oroussel/lib/libgcc_s.so.1
open syscall for file /lib/libgcc_s.so.1
open syscall for file tls/i686/mmx/libc.so.6
open syscall for file tls/i686/libc.so.6
open syscall for file tls/mmx/libc.so.6
open syscall for file tls/libc.so.6
open syscall for file i686/mmx/libc.so.6
open syscall for file i686/libc.so.6
open syscall for file mmx/libc.so.6
open syscall for file libc.so.6
open syscall for file /oldhome/oroussel/lib/libc.so.6
open syscall for file /lib/tls/libc.so.6
One traced child (pid=11171) exited with status: 10
All traced children have exited ! Game is over.

Child status: 10
Real time (s): 0.111751
CPU time (s): 0.092985
CPU user time (s): 0.083987
CPU system time (s): 0.008998
CPU usage (%): 83.2073
Max. virtual memory (cumulated for all children) (Kb): 0

Verifier Data

Verifier:	OK	0