Trace number 361225

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided into four (or five) parts:
  1. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser ! In such a case, you may want to use the "Download as text" link to get the trace as a text file.

    When the --timestamp option is passed to the runsolver program, each line output by the solver is prepended with a timestamp which indicates at what time the line was output by the solver. Times are relative to the start of the program, given in seconds, and are wall clock time (not CPU time).

    As some 'v lines' may be very long (sometimes several megabytes), the 'v line' output by your solver may be split on several lines to help limit the size of the trace recorded in the database. In any case, the exact output of your solver is preserved in a trace file.
  2. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.
  3. CONVERSION SCRIPT DATA (Optionnal)
    When a conversion script is used, this section shows the messages that were output by the conversion script.
  4. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to X seconds (see the parameters in the trace). After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to X+30 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (see the parameters in the trace).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  5. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provides some useful information on the computer.

Solver answer on this benchmark

Solver NameAnswerCPU timeWall clock time
bsolo 3.0.16SAT 0.021995 0.024279

General information on the benchmark

Namenormalized-PB06/SATUNSAT-SMALLINT/submitted-PB05/aloul/
FPGA_SAT05/normalized-fpga15_15_sat_pb.cnf.cr.opb
MD5SUM6121557b87a2568662d113be465279a2
Bench CategorySATUNSAT-SMALLINT-LIN (no optimisation, small integers, linear constraints)
Best result obtained on this benchmarkSAT
Best value of the objective obtained on this benchmark0
Best CPU time to get the best result obtained on this benchmark0.004998
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function
Optimality of the best value was proved NO
Number of variables338
Total number of constraints270
Number of constraints which are clauses240
Number of constraints which are cardinality constraints (but not clauses)30
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint7
Maximum length of a constraint15
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 16
Number of bits of the biggest sum of numbers5
Number of products (including duplicates)0
Sum of products size (including duplicates)0
Number of different products0
Sum of products size0

Solver Data (download as text)

0.00/0.00	c bsolo beta version 3.0.16 - 04/04/2007 : 1458 GMT
0.00/0.00	c Developed by Vasco Manquinho IST/UTL - INESC-ID
0.00/0.00	c type "bsolo -h" for help
0.00/0.00	c Time Limit set via environment variable PBTIMEOUT to 1800
0.00/0.00	c Time Limit set to 1800
0.00/0.00	c Memory Limit set to 1800 MB
0.00/0.00	c Instance file /tmp/evaluation/361225-1176980785/instance-361225-1176980785.opb
0.00/0.00	c File size is 21661 bytes.
0.00/0.00	c Highest Coefficient sum: 16
0.00/0.00	c Parsing was ok!!
0.00/0.00	c Total parsing time: 0.004 s
0.00/0.00	c Var: 338 Constr: 270 240/30/0 Lit: 2483 Watch. Lit: 818
0.00/0.00	c Obj. Vars: 0 (0 % of total variables)
0.00/0.01	c Pre-processing Time: 0.01 s
0.00/0.01	c    Confl   Vars     Ctrs     Lits  LPC   W.Lits     Max Learnt Conf/s Time
0.00/0.01	c        0    338      270     2483    9      818    1377      0      0 0.01
0.00/0.01	c Switching off LPR mode.
0.00/0.02	c      101    338      371     8154   21     1020    1515    101   6733 0.01
0.00/0.02	v -x156 x261 -x262 -x263 -x264 -x265 -x266 -x267 -x188 -x275 x276 -x277 -x278 -x279 -x280 -x281 -x282 -x31 -x32 -x33 -x34 -x35
0.00/0.02	v -x36 -x37 -x38 -x39 -x40 -x41 -x42 x43 -x44 -x45 x157 -x268 -x269 -x270 -x271 -x272 x273 -x274 x125 -x254 x255 -x256 -x257 -x258
0.00/0.02	v -x259 -x260 -x141 -x118 -x315 -x316 -x317 -x318 -x319 -x320 -x321 x322 -x109 -x247 -x248 -x249 -x250 x251 -x252 -x253 x49
0.00/0.02	v -x211 -x212 -x213 -x214 -x215 -x216 -x217 -x218 -x219 -x220 -x221 -x222 -x223 x224 -x225 -x22 x25 -x291 -x292 -x293 -x294
0.00/0.02	v x295 -x296 -x297 -x298 -x201 -x140 -x21 -x104 -x323 -x324 x325 -x326 -x327 -x328 -x329 -x330 x168 -x240 -x241 x242 -x243 -x244
0.00/0.02	v -x245 -x246 x72 -x307 -x308 -x309 x310 -x311 -x312 -x313 -x314 -x75 x331 -x332 -x333 -x334 -x335 -x336 -x337 -x338 -x100 -x172
0.00/0.02	v -x194 -x174 -x283 -x284 -x285 -x286 -x287 -x288 x289 -x290 -x190 x195 -x110 -x91 -x92 -x93 -x94 -x95 -x96 -x97 x98 -x99 -x101
0.00/0.02	v -x102 -x103 -x105 -x30 -x169 -x145 -x150 -x79 -x177 -x159 x144 -x80 -x26 -x299 -x300 -x301 -x302 -x303 x304 -x305 -x306 -x11
0.00/0.02	v -x24 x111 x1 -x226 -x227 -x228 x229 -x230 -x231 -x232 -x114 -x46 -x87 -x82 -x142 -x161 -x116 -x89 -x3 -x166 -x78 -x175 -x16
0.00/0.02	v -x29 -x121 -x181 -x182 -x183 -x184 -x185 -x186 -x187 -x189 -x191 -x192 -x193 -x170 -x61 -x62 -x63 -x64 -x65 -x66 -x67 -x68
0.00/0.02	v -x69 -x70 -x71 -x73 -x74 -x233 -x234 -x235 -x236 -x237 -x238 x239 -x108 -x124 -x135 -x136 -x137 -x138 -x139 -x143 -x146 -x147
0.00/0.02	v -x148 -x149 -x115 -x7 x197 -x119 -x76 -x77 -x81 -x83 -x84 -x85 x86 -x88 -x90 -x112 -x203 -x15 -x58 -x158 -x47 -x48 -x50 -x51
0.00/0.02	v -x52 -x53 -x54 -x55 -x56 -x57 -x59 -x60 -x154 -x28 -x202 -x4 -x165 -x167 -x173 -x5 -x209 -x20 -x134 -x126 -x117 -x179 -x207
0.00/0.02	v -x14 -x127 -x129 -x162 -x123 -x9 -x23 -x17 -x18 -x19 -x27 -x133 -x153 -x2 -x180 -x204 -x107 -x206 -x122 -x199 -x6 -x8 -x10 -x12
0.00/0.02	v -x13 -x198 -x176 -x196 -x200 -x205 -x208 -x210 -x152 -x155 -x151 -x160 -x163 -x164 -x106 -x113 -x120 -x130 -x171 -x178 -x128
0.00/0.02	v -x131 -x132
0.00/0.02	c  Rst    Confl    NCB      Dec     Ctrs     Lits Learnt Conf/s Time
0.00/0.02	c    1      159     58      713      429     9898    159   8833 0.02
0.00/0.02	s SATISFIABLE
0.00/0.02	c Total time: 0.018 s

Verifier Data (download as text)

OK	0

Watcher Data (download as text)

runsolver version 3.2.2 (c) roussel@cril.univ-artois.fr

command line: runsolver --timestamp -w ROOT/results/node62/watcher-361225-1176980785 -o ROOT/results/node62/solver-361225-1176980785 -C 1800 -W 3600 -M 1800 --output-limit 1,15 bsolo3.0.16 -t1800 -m1800 /tmp/evaluation/361225-1176980785/instance-361225-1176980785.opb 

Enforcing CPUTime limit (soft limit, will send SIGTERM then SIGKILL): 1800 seconds
Enforcing CPUTime limit (hard limit, will send SIGXCPU): 1830 seconds
Enforcing wall clock limit (soft limit, will send SIGTERM then SIGKILL): 3600 seconds
Enforcing VSIZE limit (soft limit, will send SIGTERM then SIGKILL): 1843200 KiB
Enforcing VSIZE limit (hard limit, stack expansion will fail with SIGSEGV, brk() and mmap() will return ENOMEM): 1894400 KiB
Solver output will be limited to a maximum of 15728640 bytes. The first 1048576 bytes and the last 14680064 bytes will be preserved
Current StackSize limit: 10240 KiB


[startup+0 s]
/proc/loadavg: 0.91 0.97 0.90 3/64 19987
/proc/meminfo: memFree=1398496/2055920 swapFree=4184556/4192956
[pid=19987] ppid=19985 vsize=11760 CPUtime=0
/proc/19987/stat : 19987 (bsolo3.0.16) R 19985 19987 19039 0 -1 4194304 369 0 0 0 0 0 0 0 18 0 1 0 16654463 12042240 337 18446744073709551615 134512640 135841103 4294956672 18446744073709551615 8541819 0 0 4096 16384 0 0 0 17 1 0 0
/proc/19987/statm: 2940 337 283 324 0 2003 0

[startup+0.0127789 s]
/proc/loadavg: 0.91 0.97 0.90 3/64 19987
/proc/meminfo: memFree=1398496/2055920 swapFree=4184556/4192956
[pid=19987] ppid=19985 vsize=4060 CPUtime=0
/proc/19987/stat : 19987 (bsolo3.0.16) R 19985 19987 19039 0 -1 4194304 437 0 0 0 0 0 0 0 18 0 1 0 16654463 4157440 399 18446744073709551615 134512640 135841103 4294956672 18446744073709551615 4294960144 0 0 4096 16384 0 0 0 17 1 0 0
/proc/19987/statm: 1015 399 308 324 0 84 0
Current children cumulated CPU time (s) 0
Current children cumulated vsize (KiB) 4060

Solver just ended. Dumping a history of the last processes samples

[startup+0.0127789 s]
/proc/loadavg: 0.91 0.97 0.90 3/64 19987
/proc/meminfo: memFree=1398496/2055920 swapFree=4184556/4192956
[pid=19987] ppid=19985 vsize=4060 CPUtime=0
/proc/19987/stat : 19987 (bsolo3.0.16) R 19985 19987 19039 0 -1 4194304 437 0 0 0 0 0 0 0 18 0 1 0 16654463 4157440 399 18446744073709551615 134512640 135841103 4294956672 18446744073709551615 4294960144 0 0 4096 16384 0 0 0 17 1 0 0
/proc/19987/statm: 1015 399 308 324 0 84 0
Current children cumulated CPU time (s) 0
Current children cumulated vsize (KiB) 4060

Child status: 0
Real time (s): 0.024279
CPU time (s): 0.021995
CPU user time (s): 0.019996
CPU system time (s): 0.001999
CPU usage (%): 90.5928
Max. virtual memory (cumulated for all children) (KiB): 4060

getrusage(RUSAGE_CHILDREN,...) data:
user time used= 0.019996
system time used= 0.001999
maximum resident set size= 0
integral shared memory size= 0
integral unshared data size= 0
integral unshared stack size= 0
page reclaims= 460
page faults= 0
swaps= 0
block input operations= 0
block output operations= 0
messages sent= 0
messages received= 0
signals received= 0
voluntary context switches= 12
involuntary context switches= 0

runsolver used 0.002999 second user time and 0.005999 second system time

The end

Launcher Data (download as text)

Begin job on node62 on Thu Apr 19 11:06:25 UTC 2007

IDJOB= 361225
IDBENCH= 1427
IDSOLVER= 163
FILE ID= node62/361225-1176980785

PBS_JOBID= 4630339

Free space on /tmp= 66494 MiB

SOLVER NAME= bsolo 3.0.16
BENCH NAME= HOME/pub/bench/PB06//final/normalized-PB06/SATUNSAT-SMALLINT/submitted-PB05/aloul/FPGA_SAT05/normalized-fpga15_15_sat_pb.cnf.cr.opb
COMMAND LINE= bsolo3.0.16 -t1800 -m1800 /tmp/evaluation/361225-1176980785/instance-361225-1176980785.opb            
RUNSOLVER COMMAND LINE= runsolver  --timestamp  -w ROOT/results/node62/watcher-361225-1176980785 -o ROOT/results/node62/solver-361225-1176980785 -C 1800 -W 3600 -M 1800 --output-limit 1,15  bsolo3.0.16 -t1800 -m1800 /tmp/evaluation/361225-1176980785/instance-361225-1176980785.opb            

META MD5SUM SOLVER= b11bf0769a124f73ad50b0fdfcd50482
MD5SUM BENCH=  6121557b87a2568662d113be465279a2

RANDOM SEED= 600825138

TIME LIMIT= 1800 seconds
MEMORY LIMIT= 1800 MiB

Linux node62.alineos.net 2.6.9-22.EL.rootsmp #1 SMP Mon Oct 3 08:59:52 CEST 2005 x86_64 x86_64 x86_64 GNU/Linux

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.216
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5914.62
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.216
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5586.94
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


/proc/meminfo:
MemTotal:      2055920 kB
MemFree:       1398968 kB
Buffers:         33516 kB
Cached:         549756 kB
SwapCached:       2820 kB
Active:         401960 kB
Inactive:       191948 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2055920 kB
LowFree:       1398968 kB
SwapTotal:     4192956 kB
SwapFree:      4184556 kB
Dirty:            4532 kB
Writeback:           0 kB
Mapped:          16440 kB
Slab:            49028 kB
Committed_AS:   167864 kB
PageTables:       1460 kB
VmallocTotal: 536870911 kB
VmallocUsed:    264952 kB
VmallocChunk: 536605679 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     2048 kB

Free space on /tmp at the end= 66494 MiB

End job on node62 on Thu Apr 19 11:06:25 UTC 2007