Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/aloul/FPGA_SAT05/normalized-fpga15_14_sat_pb.cnf.cr.opb
MD5SUM6fc7fbb8e05218938564d50faef1e68f
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 0
Optimality of the best value was proved NO
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 16
Number of bits of the biggest sum of numbers5
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.222965
Number of variables315
Total number of constraints253
Number of constraints which are clauses224
Number of constraints which are cardinality constraints (but not clauses)29
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint7
Maximum length of a constraint15

Trace number 38241

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc3 THE 2005-06-02 05:39:24 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=26308 boxname=wulflinc3 idbench=38 idsolver=19 numberseed=0
MD5SUM SOLVER: 259c660e62244fe20bfb2a303545faea  /oldhome/oroussel/solvers/Pueblo-v2
MD5SUM BENCH:  6fc7fbb8e05218938564d50faef1e68f  /oldhome/oroussel/tmp/wulflinc3/normalized-fpga15_14_sat_pb.cnf.cr.opb
REAL COMMAND:  Pueblo-v2 /oldhome/oroussel/tmp/wulflinc3/normalized-fpga15_14_sat_pb.cnf.cr.opb
IDLAUNCH: 26308
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.190
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 890.88

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.190
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        736232 kB
Buffers:         33328 kB
Cached:         243136 kB
SwapCached:        228 kB
Active:          60184 kB
Inactive:       218864 kB
HighTotal:      131008 kB
HighFree:         1652 kB
LowTotal:       903652 kB
LowFree:        734580 kB
SwapTotal:     2097136 kB
SwapFree:      2096480 kB
Dirty:              24 kB
Writeback:           0 kB
Mapped:           6328 kB
Slab:            13740 kB
Committed_AS:    71792 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1388 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-06-02 05:39:24 (client local time) WITH STATUS 10 IN 0.306952 SECONDS
stats: 26308 0 0.306952 10
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c Pueblo version 1.2 (Sept 2004)
c Developed @ University of Michigan, Ann Arbor, MI
c  by Hossein Sheini
c Solving: /oldhome/oroussel/tmp/wulflinc3/normalized-fpga15_14_sat_pb.cnf.cr.opb
c #variables read: 315 - #constraints read: 253
s SATISFIABLE
v -v200 -v239 -v240 -v241 -v242 -v243 -v244 v245 -v74 v302 -v303 -v304 -v305 -v306 -v307 -v308 -v76 -v77 -v78 -v79 -v80 -v81 v82 -v83 -v84 -v85 -v86 -v87 -v88 -v89 -v90 -v260 -v261 -v262 -v263 v264 -v265 -v266 -v182 -v218 -v219 -v220 -v221 v222 -v223 -v224 -v140 -v159 -v267 -v268 -v269 v270 -v271 -v272 -v273 -v31 -v211 -v212 -v213 v214 -v215 -v216 -v217 -v203 -v12 -v288 v289 -v290 -v291 -v292 -v293 -v294 -v7 -v253 v254 -v255 -v256 -v257 -v258 -v259 v57 -v11 -v281 -v282 -v283 -v284 -v285 -v286 v287 -v143 -v38 -v101 -v109 v232 -v233 -v234 -v235 -v236 -v237 -v238 -v166 -v174 -v189 -v36 -v246 -v247 -v248 -v249 -v250 v251 -v252 -v151 -v152 -v153 -v154 -v155 -v156 -v157 -v158 -v160 v161 -v162 -v163 -v164 -v165 -v34 -v149 -v26 -v72 -v95 -v41 -v71 -v110 -v47 -v92 -v48 -v225 -v226 v227 -v228 -v229 -v230 -v231 -v108 -v73 -v295 -v296 -v297 -v298 -v299 -v300 -v301 -v13 -v191 v125 -v75 -v309 -v310 v311 -v312 -v313 -v314 -v315 -v27 -v63 -v67 -v137 -v274 -v275 -v276 -v277 -v278 v279 -v280 -v55 -v61 -v62 -v64 -v65 -v66 -v68 v69 -v70 -v133 -v150 -v24 -v98 -v9 -v195 -v171 -v208 v32 -v33 -v35 -v37 -v39 -v40 -v42 -v43 -v44 -v45 -v102 -v186 -v93 -v138 -v116 -v193 v210 -v124 -v52 -v148 -v53 -v198 -v180 -v25 -v190 v173 -v141 -v16 -v46 -v128 -v51 -v94 v96 -v105 -v104 -v5 -v6 -v107 -v113 -v202 -v21 -v184 -v50 -v91 -v97 -v99 -v100 -v103 -v112 -v8 -v115 -v167 -v168 -v169 -v170 -v172 -v175 -v176 -v177 -v178 -v179 -v181 v183 -v185 -v187 -v188 -v192 -v194 -v135 -v196 -v197 -v199 -v201 -v204 -v205 -v206 -v207 -v209 v19 -v147 -v14 -v123 -v126 -v1 -v129 -v18 -v117 -v131 -v120 -v121 -v144 -v130 -v49 -v122 -v30 -v29 -v114 -v146 -v54 -v56 -v58 -v59 -v60 -v23 -v111 v119 v136 -v139 -v142 -v145 -v106 -v118 -v22 -v134 -v17 -v20 -v28 -v2 -v127 -v132 -v3 -v4 v10 -v15 
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Enforcing Stack size limit: 67108864 bytes
Current StackSize limit: 67108864 bytes
Raw data (loadavg): 0.41 0.72 0.82 1/54 2203
Raw data (stat): 2203 (runsolver) R 2202 20224 20223 0 -1 64 8 0 0 0 0 0 0 0 19 0 1 0 847325801 884736 94 4294967295 134512640 135332820 3221224464 3221219644 135092226 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 216 94 205 205 0 11 0
vsize: 864
[startup+0.313637 s]
Raw data (loadavg): 0.41 0.72 0.82 1/53 2203
Raw data (stat): 2203 (runsolver) R 2202 20224 20223 0 -1 64 8 0 0 0 0 0 0 0 19 0 1 0 847325801 884736 94 4294967295 134512640 135332820 3221224464 3221219644 135092226 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 216 94 205 205 0 11 0
vsize: 0

Child status: 10
Real time (s): 0.31335
CPU time (s): 0.306952
CPU user time (s): 0.298954
CPU system time (s): 0.007998
CPU usage (%): 97.9582
Max. virtual memory (Kb): 864
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	0
#### END VERIFIER DATA ####