Trace number 2685467

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided into four (or five) parts:
  1. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser ! In such a case, you may want to use the "Download as text" link to get the trace as a text file.

    When the --timestamp option is passed to the runsolver program, each line output by the solver is prepended with a timestamp which indicates at what time the line was output by the solver. Times are relative to the start of the program, given in seconds. The first timestamp (if present) is estimated CPU time. The last timestamp is wall clock time.

    As some 'v lines' may be very long (sometimes several megabytes), the 'v line' output by your solver may be split on several lines to help limit the size of the trace recorded in the database. In any case, the exact output of your solver is preserved in a trace file.
  2. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.
  3. CONVERSION SCRIPT DATA (Optionnal)
    When a conversion script is used, this section shows the messages that were output by the conversion script.
  4. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to X seconds (see the parameters in the trace). After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to X+30 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (see the parameters in the trace).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  5. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provides some useful information on the computer.

Solver answer on this benchmark

Solver NameAnswerCPU timeWall clock time
bsolo 3.2 CardUNSAT 0.127979 0.128066

General information on the benchmark

Name/DEC-SMALLINT-LIN/oliveras/j60/
normalized-j603_2-unsat.opb
MD5SUMa21481d09c6e372fceb7a960f40ed463
Bench CategoryDEC-SMALLINT-LIN (no optimisation, small integers, linear constraints)
Best result obtained on this benchmarkUNSAT
Best value of the objective obtained on this benchmark
Best CPU time to get the best result obtained on this benchmark0.100984
Has Objective FunctionNO
Satisfiable
(Un)Satisfiability was proved
Best value of the objective function
Optimality of the best value was proved
Number of variables8418
Total number of constraints26241
Number of constraints which are clauses25969
Number of constraints which are cardinality constraints (but not clauses)0
Number of constraints which are nor clauses,nor cardinality constraints272
Minimum length of a constraint1
Maximum length of a constraint18
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 23
Number of bits of the biggest number in a constraint 5
Biggest sum of numbers in a constraint 119
Number of bits of the biggest sum of numbers7
Number of products (including duplicates)0
Sum of products size (including duplicates)0
Number of different products0
Sum of products size0

Solver Data 

0.00/0.00	c bsolo beta version 3.2 - 23/05/2010 : 1630 GMT
0.00/0.00	c Developed by Vasco Manquinho and José Santos IST/UTL - INESC-ID
0.00/0.00	c type "bsolo -h" for help
0.00/0.00	c Time Limit set via environment variable PBTIMEOUT to 1800
0.00/0.00	c Time Limit set to 1800
0.00/0.00	c Learning Strategy: Cardinality Constraint Learning
0.00/0.00	c Instance file HOME/instance-2685467-1278441386.opb
0.00/0.00	c File size is 713902 bytes.
0.09/0.11	c Highest Coefficient sum: 119
0.09/0.11	c Parsing was ok!!
0.09/0.11	c Total parsing time: 0.11 s
0.09/0.12	c Var: 8418 Constr: 26241 25969/0/272 Lit: 59538 Watch. Lit: 54506
0.09/0.12	c Obj. Vars: 0 (0 % of total variables)
0.09/0.12	c  Rst    Confl    NCB      Dec     Ctrs     Lits Learnt Conf/s Time
0.09/0.12	c    0        0      0        0    26241    59538      0      0 0.12
0.09/0.12	s UNSATISFIABLE
0.09/0.12	c Total time: 0.125 s

Verifier Data 

ERROR: no interpretation found !

Watcher Data 

runsolver version 3.2.9 (svn:492) (c) roussel@cril.univ-artois.fr

command line: BIN/runsolver --timestamp -w /tmp/evaluation-result-2685467-1278441386/watcher-2685467-1278441386 -o /tmp/evaluation-result-2685467-1278441386/solver-2685467-1278441386 -C 1800 -W 2000 -M 1800 bsolo_pb10 -t1800 -l2 HOME/instance-2685467-1278441386.opb 

Enforcing CPUTime limit (soft limit, will send SIGTERM then SIGKILL): 1800 seconds
Enforcing CPUTime limit (hard limit, will send SIGXCPU): 1830 seconds
Enforcing wall clock limit (soft limit, will send SIGTERM then SIGKILL): 2000 seconds
Enforcing VSIZE limit (soft limit, will send SIGTERM then SIGKILL): 1843200 KiB
Enforcing VSIZE limit (hard limit, stack expansion will fail with SIGSEGV, brk() and mmap() will return ENOMEM): 1894400 KiB
Current StackSize limit: 10240 KiB


[startup+0 s]
/proc/loadavg: 1.12 1.03 1.01 3/105 22598
/proc/meminfo: memFree=1467584/2059040 swapFree=4192956/4192956
[pid=22598] ppid=22596 vsize=11640 CPUtime=0
/proc/22598/stat : 22598 (bsolo_pb10) R 22596 22598 21941 0 -1 4202496 375 0 0 0 0 0 0 0 25 0 1 0 12346528 11919360 293 1992294400 134512640 137138936 4288376544 18446744073709551615 136506715 0 0 4096 16384 0 0 0 17 0 0 0 0
/proc/22598/statm: 2910 293 178 642 0 2091 0

[startup+0.103421 s]
/proc/loadavg: 1.12 1.03 1.01 3/105 22598
/proc/meminfo: memFree=1467584/2059040 swapFree=4192956/4192956
[pid=22598] ppid=22596 vsize=14428 CPUtime=0.09
/proc/22598/stat : 22598 (bsolo_pb10) R 22596 22598 21941 0 -1 4202496 1202 0 0 0 9 0 0 0 25 0 1 0 12346528 14774272 1120 1992294400 134512640 137138936 4288376544 18446744073709551615 136525335 0 0 4096 16384 0 0 0 17 0 0 0 0
/proc/22598/statm: 3607 1120 328 642 0 2788 0
Current children cumulated CPU time (s) 0.09
Current children cumulated vsize (KiB) 14428

Solver just ended. Dumping a history of the last processes samples

[startup+0.103421 s]
/proc/loadavg: 1.12 1.03 1.01 3/105 22598
/proc/meminfo: memFree=1467584/2059040 swapFree=4192956/4192956
[pid=22598] ppid=22596 vsize=14428 CPUtime=0.09
/proc/22598/stat : 22598 (bsolo_pb10) R 22596 22598 21941 0 -1 4202496 1202 0 0 0 9 0 0 0 25 0 1 0 12346528 14774272 1120 1992294400 134512640 137138936 4288376544 18446744073709551615 136525335 0 0 4096 16384 0 0 0 17 0 0 0 0
/proc/22598/statm: 3607 1120 328 642 0 2788 0
Current children cumulated CPU time (s) 0.09
Current children cumulated vsize (KiB) 14428

Child status: 0
Real time (s): 0.128066
CPU time (s): 0.127979
CPU user time (s): 0.119981
CPU system time (s): 0.007998
CPU usage (%): 99.9321
Max. virtual memory (cumulated for all children) (KiB): 14428

getrusage(RUSAGE_CHILDREN,...) data:
user time used= 0.119981
system time used= 0.007998
maximum resident set size= 0
integral shared memory size= 0
integral unshared data size= 0
integral unshared stack size= 0
page reclaims= 1777
page faults= 0
swaps= 0
block input operations= 0
block output operations= 0
messages sent= 0
messages received= 0
signals received= 0
voluntary context switches= 1
involuntary context switches= 3

runsolver used 0.002999 second user time and 0.010998 second system time

The end

Launcher Data 

Begin job on node080 at 2010-07-06 20:36:26
IDJOB=2685467
IDBENCH=76117
IDSOLVER=1162
FILE ID=node080/2685467-1278441386
PBS_JOBID= 11233470
Free space on /tmp= 62540 MiB

SOLVER NAME= bsolo 3.2 Card
BENCH NAME= PB10/normalized-PB10/DEC-SMALLINT-LIN/oliveras/j60/normalized-j603_2-unsat.opb
COMMAND LINE= bsolo_pb10 -tTIMEOUT -l2 BENCHNAME
CONVERSION SCRIPT= PBconversionToLinear BENCHNAME
RUNSOLVER COMMAND LINE= BIN/runsolver --timestamp -w /tmp/evaluation-result-2685467-1278441386/watcher-2685467-1278441386 -o /tmp/evaluation-result-2685467-1278441386/solver-2685467-1278441386 -C 1800 -W 2000 -M 1800  bsolo_pb10 -t1800 -l2 HOME/instance-2685467-1278441386.opb

TIME LIMIT= 1800 seconds
MEMORY LIMIT= 1800 MiB
MAX NB THREAD= 0

MD5SUM BENCH= a21481d09c6e372fceb7a960f40ed463
RANDOM SEED=1313938239

node080.alineos.net Linux 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.255
cache size	: 2048 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 1
apicid		: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips	: 6000.51
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.255
cache size	: 2048 KB
physical id	: 3
siblings	: 1
core id		: 0
cpu cores	: 1
apicid		: 6
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5999.50
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


/proc/meminfo:
MemTotal:      2059040 kB
MemFree:       1468484 kB
Buffers:        102752 kB
Cached:         348956 kB
SwapCached:          0 kB
Active:          86396 kB
Inactive:       425480 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2059040 kB
LowFree:       1468484 kB
SwapTotal:     4192956 kB
SwapFree:      4192956 kB
Dirty:            5560 kB
Writeback:           0 kB
AnonPages:       60132 kB
Mapped:          14392 kB
Slab:            56916 kB
PageTables:       4100 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   5222476 kB
Committed_AS:   182836 kB
VmallocTotal: 34359738367 kB
VmallocUsed:    264948 kB
VmallocChunk: 34359471699 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
Hugepagesize:     2048 kB

CONVERSION COMMAND LINE= PBconversionToLinear HOME/instance-2685467-1278441386.opb

Free space on /tmp at the end= 62536 MiB
End job on node080 at 2010-07-06 20:36:26