Trace number 1879047

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided into four (or five) parts:
  1. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser ! In such a case, you may want to use the "Download as text" link to get the trace as a text file.

    When the --timestamp option is passed to the runsolver program, each line output by the solver is prepended with a timestamp which indicates at what time the line was output by the solver. Times are relative to the start of the program, given in seconds. The first timestamp (if present) is estimated CPU time. The last timestamp is wall clock time.

    As some 'v lines' may be very long (sometimes several megabytes), the 'v line' output by your solver may be split on several lines to help limit the size of the trace recorded in the database. In any case, the exact output of your solver is preserved in a trace file.
  2. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.
  3. CONVERSION SCRIPT DATA (Optionnal)
    When a conversion script is used, this section shows the messages that were output by the conversion script.
  4. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to X seconds (see the parameters in the trace). After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to X+30 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (see the parameters in the trace).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  5. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provides some useful information on the computer.

Solver answer on this benchmark

Solver NameAnswerobjCPU timeWall clock time
bsolo 3.1 clUNSAT 0.05899 0.060105

General information on the benchmark

Namenormalized-PB06/OPT-SMALLINT/submitted-PB05/manquinho/
primes-dimacs-cnf/normalized-bf2670-001.opb
MD5SUM7ecb3834576c61e36b2048d581937745
Bench CategoryOPT-SMALLINT (optimisation, small integers)
Best result obtained on this benchmarkUNSAT
Best value of the objective obtained on this benchmark
Best CPU time to get the best result obtained on this benchmark0.05899
Has Objective FunctionYES
SatisfiableNO
(Un)Satisfiability was provedYES
Best value of the objective function
Optimality of the best value was proved
Number of variables2786
Total number of constraints4827
Number of constraints which are clauses4827
Number of constraints which are cardinality constraints (but not clauses)0
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint1
Maximum length of a constraint5
Number of terms in the objective function 2786
Biggest coefficient in the objective function 1
Number of bits for the biggest coefficient in the objective function 1
Sum of the numbers in the objective function 2786
Number of bits of the sum of numbers in the objective function 12
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 2786
Number of bits of the biggest sum of numbers12
Number of products (including duplicates)0
Sum of products size (including duplicates)0
Number of different products0
Sum of products size0

Solver Data 

0.00/0.00	c bsolo beta version 3.1 - 13/04/2009 : 1630 GMT
0.00/0.00	c Developed by Vasco Manquinho and José Santos IST/UTL - INESC-ID
0.00/0.00	c type "bsolo -h" for help
0.00/0.00	c Time Limit set via environment variable PBTIMEOUT to 1800
0.00/0.00	c Learning Strategy: Clause Learning
0.00/0.00	c Time Limit set to 1800
0.00/0.00	c Memory Limit set to 1800 MB
0.00/0.00	c Instance file HOME/instance-1879047-1245153346.opb
0.00/0.00	c File size is 151905 bytes.
0.00/0.02	c Highest Coefficient sum: 2786
0.00/0.02	c Parsing was ok!!
0.00/0.02	c Total parsing time: 0.019 s
0.00/0.02	c Var: 2786 Constr: 4827 4827/0/0 Lit: 10797 Watch. Lit: 9648
0.00/0.02	c Obj. Vars: 2786 (100 % of total variables)
0.00/0.05	c Pre-processing Time: 0.055 s
0.00/0.05	c    Confl   Vars     Ctrs     Lits  LPC   W.Lits     Max Learnt Conf/s Time
0.00/0.05	c        0    570     1345     3416    2     2690     448      0      0 0.06
0.00/0.05	c Switching off lower bounding mode.
0.00/0.05	c Backtracks by Clause: 0
0.00/0.05	c Backtracks by PB constraint: 0
0.00/0.05	c  Rst    Confl    NCB      Dec     Ctrs     Lits Learnt Conf/s Time
0.00/0.05	c    0       27     14      158     1372     3490     27    473 0.06
0.00/0.05	s UNSATISFIABLE
0.00/0.05	c Total time: 0.057 s

Verifier Data 

ERROR: no interpretation found !

Watcher Data 

runsolver version 3.2.9 (svn:492) (c) roussel@cril.univ-artois.fr

command line: BIN/runsolver --timestamp -w /tmp/evaluation-result-1879047-1245153346/watcher-1879047-1245153346 -o /tmp/evaluation-result-1879047-1245153346/solver-1879047-1245153346 -C 1800 -W 2000 -M 1800 bsolo -l1 -t1800 -m1800 HOME/instance-1879047-1245153346.opb 

Enforcing CPUTime limit (soft limit, will send SIGTERM then SIGKILL): 1800 seconds
Enforcing CPUTime limit (hard limit, will send SIGXCPU): 1830 seconds
Enforcing wall clock limit (soft limit, will send SIGTERM then SIGKILL): 2000 seconds
Enforcing VSIZE limit (soft limit, will send SIGTERM then SIGKILL): 1843200 KiB
Enforcing VSIZE limit (hard limit, stack expansion will fail with SIGSEGV, brk() and mmap() will return ENOMEM): 1894400 KiB
Current StackSize limit: 10240 KiB


[startup+0 s]
/proc/loadavg: 1.00 1.02 1.00 3/64 2580
/proc/meminfo: memFree=1933096/2055920 swapFree=4181364/4192956
[pid=2580] ppid=2578 vsize=10900 CPUtime=0
/proc/2580/stat : 2580 (bsolo) R 2578 2580 2075 0 -1 4194304 279 0 0 0 0 0 0 0 18 0 1 0 182931936 11161600 263 1992294400 134512640 137136520 4294956256 18446744073709551615 136575102 0 0 4096 16384 0 0 0 17 0 0 0
/proc/2580/statm: 2725 263 175 640 0 2043 0

Solver just ended. Dumping a history of the last processes samples

Child status: 0
Real time (s): 0.060105
CPU time (s): 0.05899
CPU user time (s): 0.053991
CPU system time (s): 0.004999
CPU usage (%): 98.1449
Max. virtual memory (cumulated for all children) (KiB): 0

getrusage(RUSAGE_CHILDREN,...) data:
user time used= 0.053991
system time used= 0.004999
maximum resident set size= 0
integral shared memory size= 0
integral unshared data size= 0
integral unshared stack size= 0
page reclaims= 592
page faults= 0
swaps= 0
block input operations= 0
block output operations= 0
messages sent= 0
messages received= 0
signals received= 0
voluntary context switches= 2
involuntary context switches= 1

runsolver used 0.003999 second user time and 0.006998 second system time

The end

Launcher Data 

Begin job on node36 at 2009-06-16 13:55:46
IDJOB=1879047
IDBENCH=2103
IDSOLVER=700
FILE ID=node36/1879047-1245153346
PBS_JOBID= 9363753
Free space on /tmp= 66200 MiB

SOLVER NAME= bsolo 3.1 cl
BENCH NAME= PB06//final/normalized-PB06/OPT-SMALLINT/submitted-PB05/manquinho/primes-dimacs-cnf/normalized-bf2670-001.opb
COMMAND LINE= bsolo -l1 -tTIMEOUT -mMEMLIMIT BENCHNAME
CONVERSION SCRIPT= PBconversionToLinear BENCHNAME
RUNSOLVER COMMAND LINE= BIN/runsolver --timestamp -w /tmp/evaluation-result-1879047-1245153346/watcher-1879047-1245153346 -o /tmp/evaluation-result-1879047-1245153346/solver-1879047-1245153346 -C 1800 -W 2000 -M 1800  bsolo -l1 -t1800 -m1800 HOME/instance-1879047-1245153346.opb

TIME LIMIT= 1800 seconds
MEMORY LIMIT= 1800 MiB
MAX NB THREAD= 0

MD5SUM BENCH= 7ecb3834576c61e36b2048d581937745
RANDOM SEED=483173043

node36.alineos.net Linux 2.6.9-22.EL.rootsmp #1 SMP Mon Oct 3 08:59:52 CEST 2005

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.230
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5914.62
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.230
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5586.94
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


/proc/meminfo:
MemTotal:      2055920 kB
MemFree:       1933584 kB
Buffers:         20096 kB
Cached:          56428 kB
SwapCached:       6436 kB
Active:          55132 kB
Inactive:        30364 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2055920 kB
LowFree:       1933584 kB
SwapTotal:     4192956 kB
SwapFree:      4181364 kB
Dirty:            4092 kB
Writeback:           0 kB
Mapped:          13428 kB
Slab:            22892 kB
Committed_AS:   173284 kB
PageTables:       1364 kB
VmallocTotal: 536870911 kB
VmallocUsed:    264952 kB
VmallocChunk: 536605679 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     2048 kB

CONVERSION COMMAND LINE= PBconversionToLinear HOME/instance-1879047-1245153346.opb

Free space on /tmp at the end= 66196 MiB
End job on node36 at 2009-06-16 13:55:46