Trace number 433642

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided into four (or five) parts:
  1. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser ! In such a case, you may want to use the "Download as text" link to get the trace as a text file.

    When the --timestamp option is passed to the runsolver program, each line output by the solver is prepended with a timestamp which indicates at what time the line was output by the solver. Times are relative to the start of the program, given in seconds, and are wall clock time (not CPU time).

    As some 'v lines' may be very long (sometimes several megabytes), the 'v line' output by your solver may be split on several lines to help limit the size of the trace recorded in the database. In any case, the exact output of your solver is preserved in a trace file.
  2. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.
  3. CONVERSION SCRIPT DATA (Optionnal)
    When a conversion script is used, this section shows the messages that were output by the conversion script.
  4. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to X seconds (see the parameters in the trace). After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to X+30 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (see the parameters in the trace).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  5. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provides some useful information on the computer.

Solver answer on this benchmark

Solver NameAnswerObjective functionCPU timeWall clock time
bsolo 3.0.17? 0.028995 0.121222

General information on the benchmark

Namenormalized-PB06/OPT-BIGINT/submitted-PB06/roussel/factor/
normalized-factor-sizeN=60-sizeP=31-sizeQ=60-784051325.opb
MD5SUMe687b4e519c37adffc2bc97f299c951f
Bench CategoryOPT-BIGINT (optimisation, big integers)
Best result obtained on this benchmarkOPT
Best value of the objective obtained on this benchmark1
Best CPU time to get the best result obtained on this benchmark1.77173
Has Objective FunctionYES
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 1
Optimality of the best value was proved YES
Number of variables1951
Total number of constraints5581
Number of constraints which are clauses5580
Number of constraints which are cardinality constraints (but not clauses)0
Number of constraints which are nor clauses,nor cardinality constraints1
Minimum length of a constraint2
Maximum length of a constraint1860
Number of terms in the objective function 31
Biggest coefficient in the objective function 1073741824
Number of bits for the biggest coefficient in the objective function 31
Sum of the numbers in the objective function 2147483647
Number of bits of the sum of numbers in the objective function 31
Biggest number in a constraint 618970019642690137449562112
Number of bits of the biggest number in a constraint 90
Biggest sum of numbers in a constraint 2475880078237913026827969150
Number of bits of the biggest sum of numbers91
Number of products (including duplicates)0
Sum of products size (including duplicates)0
Number of different products0
Sum of products size0

Solver Data (download as text)

0.00/0.09	c bsolo beta version 3.0.17 - 27/04/2007 : 1600 GMT
0.00/0.09	c Developed by Vasco Manquinho IST/UTL - INESC-ID
0.00/0.09	c type "bsolo -h" for help
0.00/0.09	c Time Limit set via environment variable PBTIMEOUT to 1800
0.00/0.09	c Memory Limit set to 1800 MB
0.00/0.09	c Instance file /tmp/evaluation/433642-1177961861/instance-433642-1177961861.opb
0.00/0.09	c File size is 179769 bytes.
0.00/0.09	c Coefficients are big enough for not using lower bounding.
0.00/0.11	c Integer values too big to handle... 
0.00/0.11	c Parse Error 9
0.00/0.11	c Line: 5588
0.00/0.11	c Unable to parse file /tmp/evaluation/433642-1177961861/instance-433642-1177961861.opb
0.00/0.11	c Caught signal: 1
0.00/0.11	c  Rst    Confl    NCB      Dec     Ctrs     Lits Learnt Conf/s Time
0.00/0.11	c    0        0      0        0     5580    13020   5580      0 0.03
0.00/0.11	s UNKNOWN
0.00/0.11	c Total time: 0.025 s

Verifier Data (download as text)

ERROR: no interpretation found !

Watcher Data (download as text)

runsolver version 3.2.3 (c) roussel@cril.univ-artois.fr

command line: runsolver --timestamp -w ROOT/results/node57/watcher-433642-1177961861 -o ROOT/results/node57/solver-433642-1177961861 -C 1800 -W 3600 -M 1800 --output-limit 1,15 bsolo3.0.17 -m1800 /tmp/evaluation/433642-1177961861/instance-433642-1177961861.opb 

Enforcing CPUTime limit (soft limit, will send SIGTERM then SIGKILL): 1800 seconds
Enforcing CPUTime limit (hard limit, will send SIGXCPU): 1830 seconds
Enforcing wall clock limit (soft limit, will send SIGTERM then SIGKILL): 3600 seconds
Enforcing VSIZE limit (soft limit, will send SIGTERM then SIGKILL): 1843200 KiB
Enforcing VSIZE limit (hard limit, stack expansion will fail with SIGSEGV, brk() and mmap() will return ENOMEM): 1894400 KiB
Solver output will be limited to a maximum of 15728640 bytes. The first 1048576 bytes and the last 14680064 bytes will be preserved
Current StackSize limit: 10240 KiB


[startup+0 s]
/proc/loadavg: 0.47 0.81 0.86 3/64 7149
/proc/meminfo: memFree=1669216/2055920 swapFree=4183136/4192956
[pid=7149] ppid=7147 vsize=1408 CPUtime=0
/proc/7149/stat : 7149 (bsolo3.0.17) D 7147 7149 5441 0 -1 4194304 39 0 0 0 0 0 0 0 18 0 1 0 237322100 1441792 24 18446744073709551615 134512640 135840783 4294956688 18446744073709551615 7394084 0 2147483391 4096 0 18446744072099781622 0 0 17 1 0 0
/proc/7149/statm: 352 24 19 324 0 3 0

[startup+0.0485811 s]
/proc/loadavg: 0.47 0.81 0.86 3/64 7149
/proc/meminfo: memFree=1669216/2055920 swapFree=4183136/4192956
[pid=7149] ppid=7147 vsize=1408 CPUtime=0
/proc/7149/stat : 7149 (bsolo3.0.17) D 7147 7149 5441 0 -1 4194304 39 0 0 0 0 0 0 0 18 0 1 0 237322100 1441792 24 18446744073709551615 134512640 135840783 4294956688 18446744073709551615 7394084 0 2147483391 4096 0 18446744072099781622 0 0 17 1 0 0
/proc/7149/statm: 352 24 19 324 0 3 0
Current children cumulated CPU time (s) 0
Current children cumulated vsize (KiB) 1408

[startup+0.10159 s]
/proc/loadavg: 0.47 0.81 0.86 3/64 7149
/proc/meminfo: memFree=1669216/2055920 swapFree=4183136/4192956
[pid=7149] ppid=7147 vsize=4368 CPUtime=0
/proc/7149/stat : 7149 (bsolo3.0.17) R 7147 7149 5441 0 -1 4194304 418 0 0 0 0 0 0 0 18 0 1 0 237322100 4472832 388 18446744073709551615 134512640 135840783 4294956688 18446744073709551615 7825281 0 0 4096 16384 0 0 0 17 0 0 0
/proc/7149/statm: 1092 388 290 324 0 118 0
Current children cumulated CPU time (s) 0
Current children cumulated vsize (KiB) 4368

Solver just ended. Dumping a history of the last processes samples

Child status: 1
Real time (s): 0.121222
CPU time (s): 0.028995
CPU user time (s): 0.024996
CPU system time (s): 0.003999
CPU usage (%): 23.9189
Max. virtual memory (cumulated for all children) (KiB): 4368

getrusage(RUSAGE_CHILDREN,...) data:
user time used= 0.024996
system time used= 0.003999
maximum resident set size= 0
integral shared memory size= 0
integral unshared data size= 0
integral unshared stack size= 0
page reclaims= 592
page faults= 0
swaps= 0
block input operations= 0
block output operations= 0
messages sent= 0
messages received= 0
signals received= 0
voluntary context switches= 12
involuntary context switches= 1

runsolver used 0.001999 second user time and 0.006998 second system time

The end

Launcher Data (download as text)

Begin job on node57 on Mon Apr 30 19:37:41 UTC 2007

IDJOB= 433642
IDBENCH= 3029
IDSOLVER= 199
FILE ID= node57/433642-1177961861

PBS_JOBID= 4727738

Free space on /tmp= 66558 MiB

SOLVER NAME= bsolo 3.0.17
BENCH NAME= HOME/pub/bench/PB06/final/normalized-PB06/OPT-BIGINT/submitted-PB06/roussel/factor/normalized-factor-sizeN=60-sizeP=31-sizeQ=60-784051325.opb
COMMAND LINE= bsolo3.0.17 -m1800 /tmp/evaluation/433642-1177961861/instance-433642-1177961861.opb            
RUNSOLVER COMMAND LINE= runsolver  --timestamp  -w ROOT/results/node57/watcher-433642-1177961861 -o ROOT/results/node57/solver-433642-1177961861 -C 1800 -W 3600 -M 1800 --output-limit 1,15  bsolo3.0.17 -m1800 /tmp/evaluation/433642-1177961861/instance-433642-1177961861.opb            

META MD5SUM SOLVER= c9b15312c639dd71a11a1e3ca1b27020
MD5SUM BENCH=  e687b4e519c37adffc2bc97f299c951f

RANDOM SEED= 757357589

TIME LIMIT= 1800 seconds
MEMORY LIMIT= 1800 MiB

Linux node57.alineos.net 2.6.9-22.EL.rootsmp #1 SMP Mon Oct 3 08:59:52 CEST 2005 x86_64 x86_64 x86_64 GNU/Linux

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.239
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5914.62
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.239
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5586.94
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


/proc/meminfo:
MemTotal:      2055920 kB
MemFree:       1669624 kB
Buffers:          9416 kB
Cached:         292744 kB
SwapCached:       3704 kB
Active:          70816 kB
Inactive:       253092 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2055920 kB
LowFree:       1669624 kB
SwapTotal:     4192956 kB
SwapFree:      4183136 kB
Dirty:            6916 kB
Writeback:           0 kB
Mapped:          27676 kB
Slab:            48412 kB
Committed_AS:  2784196 kB
PageTables:       1444 kB
VmallocTotal: 536870911 kB
VmallocUsed:    264952 kB
VmallocChunk: 536605679 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     2048 kB

Free space on /tmp at the end= 66558 MiB

End job on node57 on Mon Apr 30 19:37:42 UTC 2007