Trace number 361171

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided into four (or five) parts:
  1. SOLVER DATA
    This is the output of the solver (stdout and stderr).
    Note that some very long lines in this section may be truncated by your web browser ! In such a case, you may want to use the "Download as text" link to get the trace as a text file.

    When the --timestamp option is passed to the runsolver program, each line output by the solver is prepended with a timestamp which indicates at what time the line was output by the solver. Times are relative to the start of the program, given in seconds, and are wall clock time (not CPU time).

    As some 'v lines' may be very long (sometimes several megabytes), the 'v line' output by your solver may be split on several lines to help limit the size of the trace recorded in the database. In any case, the exact output of your solver is preserved in a trace file.
  2. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.
  3. CONVERSION SCRIPT DATA (Optionnal)
    When a conversion script is used, this section shows the messages that were output by the conversion script.
  4. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to X seconds (see the parameters in the trace). After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to X+30 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (see the parameters in the trace).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  5. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provides some useful information on the computer.

Solver answer on this benchmark

Solver NameAnswerCPU timeWall clock time
Pueblo 1.4SAT 0.023995 0.0248131

General information on the benchmark

Namenormalized-PB06/SATUNSAT-SMALLINT/submitted-PB05/aloul/
FPGA_SAT05/normalized-fpga12_10_sat_pb.cnf.cr.opb
MD5SUM08f887bbbbfea31f6c38c070eebe6907
Bench CategorySATUNSAT-SMALLINT-LIN (no optimisation, small integers, linear constraints)
Best result obtained on this benchmarkSAT
Best value of the objective obtained on this benchmark0
Best CPU time to get the best result obtained on this benchmark0.002998
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function
Optimality of the best value was proved NO
Number of variables180
Total number of constraints152
Number of constraints which are clauses130
Number of constraints which are cardinality constraints (but not clauses)22
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint6
Maximum length of a constraint12
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 13
Number of bits of the biggest sum of numbers4
Number of products (including duplicates)0
Sum of products size (including duplicates)0
Number of different products0
Sum of products size0

Solver Data (download as text)

0.00/0.00	c Pueblo version 1.4 (September 2005)
0.00/0.00	c Developed @ University of Michigan, Ann Arbor, MI
0.00/0.00	c  by Hossein Sheini
0.00/0.00	c starting to Solve
0.00/0.00	c #variables read: 180 - #constraints read: 152
0.00/0.02	c total time              : 0.02 s
0.00/0.02	s SATISFIABLE
0.00/0.02	v -x30 -x146 -x147 -x148 -x149 -x150 -x61 -x121 -x122 -x123 -x124 x125 -x80 -x156 -x157 -x158 -x159 -x160 -x14 -x126 -x127 -x128
0.00/0.02	v x129 -x130 -x70 -x166 -x167 -x168 x169 -x170 -x99 -x131 -x132 x133 -x134 -x135 -x116 -x36 -x176 -x177 x178 -x179 -x180 -x95
0.00/0.02	v -x171 x172 -x173 -x174 -x175 -x97 -x47 -x74 x109 -x110 -x111 -x112 -x113 -x114 -x115 -x117 -x118 -x119 -x120 -x18 -x45 x161
0.00/0.02	v -x162 -x163 -x164 -x165 -x20 x26 -x33 -x59 -x67 -x151 -x152 -x153 -x154 x155 -x103 -x94 x107 -x25 -x27 -x28 -x29 -x31 -x32 -x34
0.00/0.02	v -x35 -x4 -x136 x137 -x138 -x139 -x140 -x76 -x62 x63 -x64 -x65 -x66 -x68 -x69 -x71 -x72 -x16 -x46 -x89 x141 -x142 -x143 -x144
0.00/0.02	v -x145 -x49 -x50 -x51 -x52 -x53 -x54 -x55 -x56 -x57 -x58 x60 -x84 -x19 -x75 -x104 -x48 -x39 -x22 -x73 -x13 -x83 x93 -x91 -x86 x7
0.00/0.02	v -x1 -x43 -x11 x82 -x81 -x15 -x37 -x77 -x78 -x5 -x3 -x8 -x2 -x6 -x9 -x10 -x12 -x101 -x24 -x79 -x100 -x106 -x102 -x92 -x98 -x85 -x87
0.00/0.02	v -x88 -x90 -x96 x40 -x41 -x38 -x44 -x21 -x23 x17 -x42 -x105 -x108

Verifier Data (download as text)

OK	0

Conversion Script Data (download as text)

/tmp/evaluation/361171-1176980378/instance-361171-1176980378.opb is already a linear file

Watcher Data (download as text)

runsolver version 3.2.2 (c) roussel@cril.univ-artois.fr

command line: runsolver --timestamp -w ROOT/results/node30/watcher-361171-1176980378 -o ROOT/results/node30/solver-361171-1176980378 -C 1800 -W 3600 -M 1800 --output-limit 1,15 Pueblo /tmp/evaluation/361171-1176980378/instance-361171-1176980378.opb 

Enforcing CPUTime limit (soft limit, will send SIGTERM then SIGKILL): 1800 seconds
Enforcing CPUTime limit (hard limit, will send SIGXCPU): 1830 seconds
Enforcing wall clock limit (soft limit, will send SIGTERM then SIGKILL): 3600 seconds
Enforcing VSIZE limit (soft limit, will send SIGTERM then SIGKILL): 1843200 KiB
Enforcing VSIZE limit (hard limit, stack expansion will fail with SIGSEGV, brk() and mmap() will return ENOMEM): 1894400 KiB
Solver output will be limited to a maximum of 15728640 bytes. The first 1048576 bytes and the last 14680064 bytes will be preserved
Current StackSize limit: 10240 KiB


[startup+0 s]
/proc/loadavg: 1.00 1.00 0.94 3/77 27253
/proc/meminfo: memFree=1795568/2055920 swapFree=4157140/4192956
[pid=27253] ppid=27251 vsize=2552 CPUtime=0
/proc/27253/stat : 27253 (Pueblo) R 27251 27253 26109 0 -1 4194304 264 0 0 0 0 0 0 0 18 0 1 0 145953519 2613248 234 18446744073709551615 134512640 134579096 4294956704 18446744073709551615 7184297 0 0 4096 0 0 0 0 17 1 0 0
/proc/27253/statm: 638 234 199 16 0 77 0

Solver just ended. Dumping a history of the last processes samples

Child status: 10
Real time (s): 0.0248131
CPU time (s): 0.023995
CPU user time (s): 0.020996
CPU system time (s): 0.002999
CPU usage (%): 96.7031
Max. virtual memory (cumulated for all children) (KiB): 0

getrusage(RUSAGE_CHILDREN,...) data:
user time used= 0.020996
system time used= 0.002999
maximum resident set size= 0
integral shared memory size= 0
integral unshared data size= 0
integral unshared stack size= 0
page reclaims= 321
page faults= 0
swaps= 0
block input operations= 0
block output operations= 0
messages sent= 0
messages received= 0
signals received= 0
voluntary context switches= 13
involuntary context switches= 0

runsolver used 0.001999 second user time and 0.005999 second system time

The end

Launcher Data (download as text)

Begin job on node30 on Thu Apr 19 10:59:38 UTC 2007

IDJOB= 361171
IDBENCH= 1423
IDSOLVER= 165
FILE ID= node30/361171-1176980378

PBS_JOBID= 4630311

Free space on /tmp= 66394 MiB

SOLVER NAME= Pueblo 1.4
BENCH NAME= HOME/pub/bench/PB06//final/normalized-PB06/SATUNSAT-SMALLINT/submitted-PB05/aloul/FPGA_SAT05/normalized-fpga12_10_sat_pb.cnf.cr.opb
COMMAND LINE= Pueblo /tmp/evaluation/361171-1176980378/instance-361171-1176980378.opb
CONVERSION COMMAND LINE= runsolver -w ROOT/results/node30/convwatcher-361171-1176980378 -o ROOT/results/node30/conversion-361171-1176980378 -C 600 -M 1800 PBconversionToLinear /tmp/evaluation/361171-1176980378/instance-361171-1176980378.opb
CONVERSION RUNSOLVER STATUS CODE= 0
CONVERSION STATUS CODE= 0

RUNSOLVER COMMAND LINE= runsolver  --timestamp  -w ROOT/results/node30/watcher-361171-1176980378 -o ROOT/results/node30/solver-361171-1176980378 -C 1800 -W 3600 -M 1800 --output-limit 1,15  Pueblo /tmp/evaluation/361171-1176980378/instance-361171-1176980378.opb

META MD5SUM SOLVER= 9ebec3e8d890fdeefad01654ad9b68b7
MD5SUM BENCH=  08f887bbbbfea31f6c38c070eebe6907

RANDOM SEED= 690188519

TIME LIMIT= 1800 seconds
MEMORY LIMIT= 1800 MiB

Linux node30.alineos.net 2.6.9-22.EL.rootsmp #1 SMP Mon Oct 3 08:59:52 CEST 2005 x86_64 x86_64 x86_64 GNU/Linux

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.218
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5914.62
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	:                   Intel(R) Xeon(TM) CPU 3.00GHz
stepping	: 3
cpu MHz		: 3000.218
cache size	: 2048 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl cid cx16 xtpr
bogomips	: 5586.94
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


/proc/meminfo:
MemTotal:      2055920 kB
MemFree:       1796040 kB
Buffers:         34012 kB
Cached:         160392 kB
SwapCached:      15104 kB
Active:          60424 kB
Inactive:       157152 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2055920 kB
LowFree:       1796040 kB
SwapTotal:     4192956 kB
SwapFree:      4157140 kB
Dirty:            2300 kB
Writeback:           0 kB
Mapped:          30296 kB
Slab:            27900 kB
Committed_AS:  2857768 kB
PageTables:       1776 kB
VmallocTotal: 536870911 kB
VmallocUsed:    264952 kB
VmallocChunk: 536605679 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     2048 kB

Free space on /tmp at the end= 66394 MiB

End job on node30 on Thu Apr 19 10:59:39 UTC 2007