PB'05 competition: run trace

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:

LAUNCHER DATA
These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
SOLVER DATA
This is the output of the solver (stdout and stderr).
WATCHER DATA
This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
VERIFIER DATA
The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Name	normalized-opb/submitted/een/normalized-pk1.opb
MD5SUM	fe0e5f3c1b66147fb7b1ccf35b46b343
Bench Category	optimization, small integers (OPTSMALLINT)
Has Objective Function	YES
Satisfiable	YES
(Un)Satisfiability was proved	YES
Best value of the objective function	0
Optimality of the best value was proved	NO
Number of terms in the objective function	1
Biggest coefficient in the objective function	1
Number of bits for the biggest coefficient in the objective function	1
Sum of the numbers in the objective function	1
Number of bits of the sum of numbers in the objective function	1
Biggest number in a constraint	1055
Number of bits of the biggest number in a constraint	11
Biggest sum of numbers in a constraint	2852
Number of bits of the biggest sum of numbers	12
Best result obtained on this benchmark	SAT
Best CPU time to get the best result obtained on this benchmark	0.019996
Number of variables	86
Total number of constraints	60
Number of constraints which are clauses	30
Number of constraints which are cardinality constraints (but not clauses)	0
Number of constraints which are nor clauses,nor cardinality constraints	30
Minimum length of a constraint	2
Maximum length of a constraint	57

Trace number 7013

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc6 THE 2005-04-14 21:12:00 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=5122 boxname=wulflinc6 idbench=394 idsolver=13 numberseed=0
MD5SUM SOLVER: 
MD5SUM BENCH:  fe0e5f3c1b66147fb7b1ccf35b46b343  /oldhome/oroussel/tmp/wulflinc6/normalized-pk1.opb
REAL COMMAND:  minisat+ -w /oldhome/oroussel/tmp/wulflinc6/normalized-pk1.opb /oldhome/oroussel/tmp/wulflinc6/normalized-pk1.opb
IDLAUNCH: 5122
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.042
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.042
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        858572 kB
Buffers:         36796 kB
Cached:         116552 kB
SwapCached:       2644 kB
Active:          61900 kB
Inactive:        96912 kB
HighTotal:      131008 kB
HighFree:        10612 kB
LowTotal:       903652 kB
LowFree:        847960 kB
SwapTotal:     2097136 kB
SwapFree:      2094492 kB
Dirty:              40 kB
Writeback:           0 kB
Mapped:           6932 kB
Slab:            11648 kB
Committed_AS:    63484 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-04-14 21:12:02 (client local time) WITH STATUS 30 IN 1.01684 SECONDS
stats: 5122 0 1.01684 30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c Parsing PB file...
c Converting 60 PB-constraints to clauses...
c   -- Unit propagations: (none)
c   -- Detecting intervals from adjacent constraints: (none)
c   -- Clauses(.)/Splits(s): ..............................
c ---[  29]---> Adder-cost: 290   maxlim: 731   bits: 11/10
c ---[  28]---> Adder-cost: 290   maxlim: 677   bits: 11/10
c ---[  27]---> Adder-cost: 310   maxlim: 731   bits: 11/10
c ---[  26]---> Adder-cost: 309   maxlim: 1052   bits: 11/11
c ---[  25]---> Adder-cost: 316   maxlim: 731   bits: 11/10
c ---[  24]---> Adder-cost: 318   maxlim: 990   bits: 11/10
c ---[  23]---> Adder-cost: 300   maxlim: 731   bits: 11/10
c ---[  22]---> Adder-cost: 300   maxlim: 1072   bits: 11/11
c ---[  21]---> Adder-cost: 300   maxlim: 731   bits: 11/10
c ---[  20]---> Adder-cost: 300   maxlim: 885   bits: 11/10
c ---[  19]---> Adder-cost: 302   maxlim: 731   bits: 11/10
c ---[  18]---> Adder-cost: 306   maxlim: 1061   bits: 11/11
c ---[  17]---> Adder-cost: 303   maxlim: 731   bits: 11/10
c ---[  16]---> Adder-cost: 294   maxlim: 843   bits: 11/10
c ---[  15]---> Adder-cost: 298   maxlim: 731   bits: 11/10
c ---[  14]---> Adder-cost: 300   maxlim: 960   bits: 11/10
c ---[  13]---> Adder-cost: 276   maxlim: 731   bits: 11/10
c ---[  12]---> Adder-cost: 280   maxlim: 754   bits: 11/10
c ---[  11]---> Adder-cost: 296   maxlim: 731   bits: 11/10
c ---[  10]---> Adder-cost: 290   maxlim: 947   bits: 11/10
c ---[   9]---> Adder-cost: 306   maxlim: 731   bits: 11/10
c ---[   8]---> Adder-cost: 306   maxlim: 1064   bits: 11/11
c ---[   7]---> Adder-cost: 302   maxlim: 731   bits: 11/10
c ---[   6]---> Adder-cost: 298   maxlim: 1014   bits: 11/10
c ---[   5]---> Adder-cost: 304   maxlim: 731   bits: 11/10
c ---[   4]---> Adder-cost: 300   maxlim: 839   bits: 11/10
c ---[   3]---> Adder-cost: 283   maxlim: 731   bits: 11/10
c ---[   2]---> Adder-cost: 282   maxlim: 1003   bits: 11/10
c ---[   1]---> Adder-cost: 294   maxlim: 731   bits: 11/10
c ---[   0]---> Adder-cost: 296   maxlim: 807   bits: 11/10
c ==================================[MINISAT+]==================================
c | Conflicts | Original         | Learnt                           | Progress |
c |           | Clauses Literals |     Max Clauses Literals     LPC |          |
c ==============================================================================
c |         0 |   61427   218938 |   20475       0        0     nan |  0.000 % |
c |       101 |   61427   218938 |   22522     101      655     6.5 |  1.910 % |
c |       251 |   61427   218938 |   24774     251     3008    12.0 |  1.910 % |
c ==============================================================================
c [1mFound solution: 1[0m
c   -- Detecting intervals from adjacent constraints: (none)
c   -- Clauses(.)/Splits(s): (none)
c ==================================[MINISAT+]==================================
c | Conflicts | Original         | Learnt                           | Progress |
c |           | Clauses Literals |     Max Clauses Literals     LPC |          |
c ==============================================================================
c |       328 |   60805   216718 |   20268     327     3829    11.7 |  1.910 % |
c ==============================================================================
c [1mFound solution: 0[0m
c [1mOptimal solution: 0[0m
s OPTIMUM FOUND
v -x0 -x85 -x84 -x83 -x82 -x81 -x80 -x79 -x78 -x77 -x76 -x75 -x74 -x73 -x72 -x71 -x56 -x57 -x58 -x59 -x60 -x61 -x62 -x63 -x64 -x65 -x66 -x67 -x68 -x69 -x70 x35 -x54 -x4 -x31 -x47 x5 x20 x36 -x42 x55 x11 -x33 -x51 x53 x30 -x14 x34 x52 x43 -x10 x50 -x13 -x24 -x27 -x40 -x37 -x1 -x6 x26 -x49 -x3 -x9 -x12 -x16 -x19 -x22 -x29 -x41 -x7 -x46 -x45 -x8 -x39 -x28 x18 -x25 -x32 -x2 x38 x21 -x15 -x17 -x23 x44 -x48
c _______________________________________________________________________________
c 
c restarts              : 4
c conflicts             : 351            (360 /sec)
c decisions             : 2375           (2436 /sec)
c propagations          : 0              (0 /sec)
c inspects              : 0              (0 /sec)
c CPU time              : 0.974851 s
c _______________________________________________________________________________
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 0.74 0.92 0.86 2/54 7432
Raw data (stat): 7432 (runsolver) R 7431 29653 29652 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 429512829 1052672 99 4294967295 134512640 135381576 3221224480 3221219724 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+1.02545 s]
Raw data (loadavg): 0.74 0.92 0.86 1/53 7432
Raw data (stat): 7432 (runsolver) R 7431 29653 29652 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 429512829 1052672 99 4294967295 134512640 135381576 3221224480 3221219724 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 1.02481
CPU time (s): 1.01684
CPU user time (s): 0.977851
CPU system time (s): 0.038994
CPU usage (%): 99.2229
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	0
#### END VERIFIER DATA ####