Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/aloul/FPGA_SAT05/normalized-fpga12_11_sat_pb.cnf.cr.opb
MD5SUM2acc4f964e1e6f176bb0ec9705d398d2
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 0
Optimality of the best value was proved NO
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 13
Number of bits of the biggest sum of numbers4
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.044993
Number of variables198
Total number of constraints166
Number of constraints which are clauses143
Number of constraints which are cardinality constraints (but not clauses)23
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint6
Maximum length of a constraint12

Trace number 4708 

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc11 THE 2005-04-13 20:24:44 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=257 boxname=wulflinc11 idbench=29 idsolver=5 numberseed=0
MD5SUM SOLVER: 1d62365061f6d70b1a242542b016b2e4  /oldhome/oroussel/solvers/minisat+
MD5SUM BENCH:  2acc4f964e1e6f176bb0ec9705d398d2  /oldhome/oroussel/tmp/wulflinc11/normalized-fpga12_11_sat_pb.cnf.cr.opb
REAL COMMAND:  minisat+ /oldhome/oroussel/tmp/wulflinc11/normalized-fpga12_11_sat_pb.cnf.cr.opb
IDLAUNCH: 257
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.028
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.028
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        921240 kB
Buffers:         34124 kB
Cached:          55192 kB
SwapCached:       4932 kB
Active:          52892 kB
Inactive:        44232 kB
HighTotal:      131008 kB
HighFree:        72072 kB
LowTotal:       903652 kB
LowFree:        849168 kB
SwapTotal:     2097136 kB
SwapFree:      2092204 kB
Dirty:              28 kB
Writeback:           0 kB
Mapped:           6924 kB
Slab:            10776 kB
Committed_AS:    63488 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-04-13 20:24:44 (client local time) WITH STATUS 30 IN 0.042992 SECONDS
stats: 257 7 0.042992 30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c Parsing PB file...
c Converting 166 PB-constraints to clauses...
c   -- Unit propagations: (none)
c   -- Detecting intervals from adjacent constraints: (none)
c   -- Clauses(.)/Splits(s): ...............................................................................................................................................
c ---[  22]---> BDD-cost:   19
c ---[  21]---> BDD-cost:   19
c ---[  20]---> BDD-cost:   19
c ---[  19]---> BDD-cost:   19
c ---[  18]---> BDD-cost:   19
c ---[  17]---> BDD-cost:   19
c ---[  16]---> BDD-cost:   19
c ---[  15]---> BDD-cost:   19
c ---[  14]---> BDD-cost:   19
c ---[  13]---> BDD-cost:   19
c ---[  12]---> BDD-cost:   19
c ---[  11]---> BDD-cost:   19
c ---[  10]---> BDD-cost:    9
c ---[   9]---> BDD-cost:    9
c ---[   8]---> BDD-cost:    9
c ---[   7]---> BDD-cost:    9
c ---[   6]---> BDD-cost:    9
c ---[   5]---> BDD-cost:    9
c ---[   4]---> BDD-cost:    9
c ---[   3]---> BDD-cost:    9
c ---[   2]---> BDD-cost:    9
c ---[   1]---> BDD-cost:    9
c ---[   0]---> BDD-cost:    9
c ==================================[MINISAT+]==================================
c | Conflicts | Original         | Learnt                           | Progress |
c |           | Clauses Literals |     Max Clauses Literals     LPC |          |
c ==============================================================================
c |         0 |     926     3035 |     308       0        0     nan |  0.000 % |
c |       101 |     926     3035 |     338     101     4347    43.0 |  4.381 % |
c ==============================================================================
c SATISFIABLE: No goal function specified.
s SATISFIABLE
v
c _______________________________________________________________________________
c 
c restarts              : 2
c conflicts             : 139            (4213 /sec)
c decisions             : 457            (13851 /sec)
c propagations          : 0              (0 /sec)
c inspects              : 0              (0 /sec)
c CPU time              : 0.032994 s
c _______________________________________________________________________________
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 0.82 0.94 0.90 2/54 2730
Raw data (stat): 2730 (runsolver) R 2729 32461 32460 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 420586304 1052672 99 4294967295 134512640 135381576 3221224512 3221219756 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+0.051068 s]
Raw data (loadavg): 0.82 0.94 0.90 1/53 2730
Raw data (stat): 2730 (runsolver) R 2729 32461 32460 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 420586304 1052672 99 4294967295 134512640 135381576 3221224512 3221219756 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 0.050805
CPU time (s): 0.042992
CPU user time (s): 0.032994
CPU system time (s): 0.009998
CPU usage (%): 84.6216
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
ERROR: no interpretation found !
#### END VERIFIER DATA ####