Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/manquinho/routing/normalized-s3-3-3-1pb.opb
MD5SUM43d2b140af9fb3bc63f5a381e50e6332
Bench Categoryoptimization, small integers (OPTSMALLINT)
Has Objective FunctionYES
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 36
Optimality of the best value was proved NO
Number of terms in the objective function 216
Biggest coefficient in the objective function 1
Number of bits for the biggest coefficient in the objective function 1
Sum of the numbers in the objective function 216
Number of bits of the sum of numbers in the objective function 8
Biggest number in a constraint 3
Number of bits of the biggest number in a constraint 2
Biggest sum of numbers in a constraint 216
Number of bits of the biggest sum of numbers8
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.082986
Number of variables216
Total number of constraints584
Number of constraints which are clauses572
Number of constraints which are cardinality constraints (but not clauses)12
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint2
Maximum length of a constraint18

Trace number 4366

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc32 THE 2005-04-13 16:58:12 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=2079 boxname=wulflinc32 idbench=231 idsolver=9 numberseed=0
MD5SUM SOLVER: daf345f6fbf228671abfac48013b9cac  /oldhome/oroussel/solvers/sat4jPseudo.jar
MD5SUM BENCH:  43d2b140af9fb3bc63f5a381e50e6332  /oldhome/oroussel/tmp/wulflinc32/normalized-s3-3-3-1pb.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudo.jar /oldhome/oroussel/tmp/wulflinc32/normalized-s3-3-3-1pb.opb
IDLAUNCH: 2079
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.085
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.085
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034724 kB
MemFree:        762444 kB
Buffers:         32568 kB
Cached:         128400 kB
SwapCached:       1212 kB
Active:         133624 kB
Inactive:       107640 kB
HighTotal:      131072 kB
HighFree:         3616 kB
LowTotal:       903652 kB
LowFree:        758828 kB
SwapTotal:     2097892 kB
SwapFree:      2096680 kB
Dirty:            2244 kB
Writeback:           0 kB
Mapped:          81768 kB
Slab:            25284 kB
Committed_AS:   174000 kB
PageTables:        432 kB
VmallocTotal:   114680 kB
VmallocUsed:      1368 kB
VmallocChunk:   113252 kB
JOB ENDED THE 2005-04-13 16:58:21 (client local time) WITH STATUS 30 IN  SECONDS
stats: 2079 0  30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c solving /oldhome/oroussel/tmp/wulflinc32/normalized-s3-3-3-1pb.opb
c reading problem 
c [nbvar=216]
c [nbconstr=584]
c time 1.213
c #vars     216
c #clauses  584
c starts	: 0
c conflicts	: 0
c decisions	: 0
c propagations	: 0
c inspects	: 0
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 0
c SATISFIABLE
c OPTIMIZING...
c 
c CURRENT OPTIMUM=36
c Current CPU time (ms) : 4.918
c starts	: 1
c conflicts	: 18
c decisions	: 92
c propagations	: 889
c inspects	: 2090
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 18
c root simplifications	: 3
c Total CPU time (ms) : 8.518
c 
s OPTIMUM FOUND
v v1 -v2 -v3 -v4 -v5 -v6 -v7 v8 -v9 -v10 v11 -v12 -v13 -v14 -v15 -v16 -v17 -v18 -v19 -v20 v21 -v22 -v23 -v24 -v25 -v26 -v27 v28 v29 v30 -v31 -v32 -v33 -v34 -v35 v36 v37 v38 -v39 -v40 -v41 -v42 -v43 -v44 -v45 -v46 -v47 -v48 -v49 v50 -v51 -v52 -v53 -v54 -v55 -v56 v57 -v58 -v59 -v60 -v61 -v62 -v63 -v64 -v65 -v66 -v67 -v68 v69 -v70 -v71 v72 -v73 -v74 -v75 v76 -v77 -v78 -v79 -v80 -v81 -v82 -v83 v84 v85 -v86 -v87 -v88 -v89 -v90 -v91 v92 -v93 -v94 v95 -v96 -v97 -v98 -v99 -v100 v101 v102 -v103 -v104 -v105 v106 -v107 -v108 -v109 v110 v111 -v112 -v113 -v114 -v115 v116 -v117 -v118 -v119 -v120 -v121 -v122 v123 v124 -v125 -v126 -v127 -v128 -v129 -v130 -v131 -v132 -v133 -v134 v135 -v136 -v137 -v138 -v139 -v140 -v141 -v142 -v143 -v144 -v145 -v146 -v147 -v148 -v149 -v150 -v151 -v152 -v153 -v154 v155 -v156 -v157 -v158 -v159 -v160 v161 v162 -v163 -v164 -v165 -v166 -v167 -v168 -v169 -v170 -v171 -v172 -v173 -v174 v175 -v176 -v177 -v178 -v179 -v180 -v181 -v182 -v183 -v184 -v185 -v186 v187 -v188 -v189 v190 -v191 -v192 -v193 -v194 -v195 -v196 -v197 -v198 -v199 -v200 -v201 v202 -v203 -v204 -v205 -v206 -v207 -v208 -v209 -v210 v211 -v212 -v213 -v214 -v215 -v216 
c objectif function=36
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 1.01 1.00 0.92 2/53 9220
Raw data (stat): 9220 (runsolver) R 9219 7987 7986 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 477565897 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+9.40695 s]
Raw data (loadavg): 1.17 1.03 0.93 1/52 9232
Raw data (stat): 9220 (runsolver) R 9219 7987 7986 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 477565897 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 9.40606
CPU time (s): 17.4363
CPU user time (s): 16.8524
CPU system time (s): 0.583911
CPU usage (%): 185.374
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	36
#### END VERIFIER DATA ####