PB'05 competition: run trace

Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:

LAUNCHER DATA
These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
SOLVER DATA
This is the output of the solver (stdout and stderr).
WATCHER DATA
This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
VERIFIER DATA
The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Name	normalized-opb/submitted/manquinho/primes-dimacs-cnf/normalized-aim-50-2_0-yes1-3.opb
MD5SUM	0254126da99ff200a0bec7ae3b6fe8ba
Bench Category	optimization, small integers (OPTSMALLINT)
Has Objective Function	YES
Satisfiable	YES
(Un)Satisfiability was proved	YES
Best value of the objective function	50
Optimality of the best value was proved	NO
Number of terms in the objective function	100
Biggest coefficient in the objective function	1
Number of bits for the biggest coefficient in the objective function	1
Sum of the numbers in the objective function	100
Number of bits of the sum of numbers in the objective function	7
Biggest number in a constraint	1
Number of bits of the biggest number in a constraint	1
Biggest sum of numbers in a constraint	100
Number of bits of the biggest sum of numbers	7
Best result obtained on this benchmark	SAT
Best CPU time to get the best result obtained on this benchmark	0.014996
Number of variables	100
Total number of constraints	150
Number of constraints which are clauses	150
Number of constraints which are cardinality constraints (but not clauses)	0
Number of constraints which are nor clauses,nor cardinality constraints	0
Minimum length of a constraint	2
Maximum length of a constraint	3

Trace number 4265

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc6 THE 2005-04-13 16:15:07 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=1017 boxname=wulflinc6 idbench=113 idsolver=9 numberseed=0
MD5SUM SOLVER: daf345f6fbf228671abfac48013b9cac  /oldhome/oroussel/solvers/sat4jPseudo.jar
MD5SUM BENCH:  0254126da99ff200a0bec7ae3b6fe8ba  /oldhome/oroussel/tmp/wulflinc6/normalized-aim-50-2_0-yes1-3.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudo.jar /oldhome/oroussel/tmp/wulflinc6/normalized-aim-50-2_0-yes1-3.opb
IDLAUNCH: 1017
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.042
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.042
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        932908 kB
Buffers:         33152 kB
Cached:          46824 kB
SwapCached:       2644 kB
Active:          43636 kB
Inactive:        41796 kB
HighTotal:      131008 kB
HighFree:        80388 kB
LowTotal:       903652 kB
LowFree:        852520 kB
SwapTotal:     2097136 kB
SwapFree:      2094492 kB
Dirty:              40 kB
Writeback:           0 kB
Mapped:           6928 kB
Slab:            10732 kB
Committed_AS:    63476 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-04-13 16:15:11 (client local time) WITH STATUS 30 IN  SECONDS
stats: 1017 0  30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c solving /oldhome/oroussel/tmp/wulflinc6/normalized-aim-50-2_0-yes1-3.opb
c reading problem 
c [nbvar=100]
c [nbconstr=150]
c time 0.464
c #vars     100
c #clauses  150
c starts	: 0
c conflicts	: 0
c decisions	: 0
c propagations	: 0
c inspects	: 0
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 0
c SATISFIABLE
c OPTIMIZING...
c 
c CURRENT OPTIMUM=50
c Current CPU time (ms) : 1.191
c starts	: 1
c conflicts	: 14
c decisions	: 36
c propagations	: 406
c inspects	: 660
c learned literals	: 1
c learned binary clauses	: 4
c learned ternary clauses	: 7
c learned clauses	: 13
c root simplifications	: 3
c Total CPU time (ms) : 1.666
c 
s OPTIMUM FOUND
v x1 -x2 -x3 x4 x5 -x6 x7 -x8 x9 -x10 -x11 x12 -x13 x14 -x15 x16 x17 -x18 -x19 x20 -x21 x22 x23 -x24 -x25 x26 -x27 x28 x29 -x30 x31 -x32 -x33 x34 x35 -x36 -x37 x38 -x39 x40 x41 -x42 -x43 x44 x45 -x46 x47 -x48 -x49 x50 x51 -x52 x53 -x54 -x55 x56 -x57 x58 -x59 x60 -x61 x62 x63 -x64 -x65 x66 x67 -x68 x69 -x70 x71 -x72 -x73 x74 x75 -x76 -x77 x78 x79 -x80 -x81 x82 x83 -x84 x85 -x86 x87 -x88 -x89 x90 x91 -x92 x93 -x94 -x95 x96 x97 -x98 -x99 x100 
c objectif function=50
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 1.02 0.97 0.75 2/54 30267
Raw data (stat): 30267 (runsolver) R 30266 29653 29652 0 -1 64 1 0 0 0 0 0 0 0 19 0 1 0 419090124 1052672 97 4294967295 134512640 135381576 3221224432 3221219804 135024803 0 0 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 97 215 215 0 42 0
vsize: 1028
[startup+3.26729 s]
Raw data (loadavg): 1.18 1.01 0.76 1/53 30279
Raw data (stat): 30267 (runsolver) R 30266 29653 29652 0 -1 64 1 0 0 0 0 0 0 0 19 0 1 0 419090124 1052672 97 4294967295 134512640 135381576 3221224432 3221219804 135024803 0 0 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 97 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 3.26699
CPU time (s): 3.00854
CPU user time (s): 2.87756
CPU system time (s): 0.13098
CPU usage (%): 92.0891
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	50
#### END VERIFIER DATA ####