Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/manquinho/primes-dimacs-cnf/normalized-aim-100-6_0-yes1-4.opb
MD5SUMb52c079073d6fbecb53bdc15d0413f75
Bench Categoryoptimization, small integers (OPTSMALLINT)
Has Objective FunctionYES
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 100
Optimality of the best value was proved NO
Number of terms in the objective function 200
Biggest coefficient in the objective function 1
Number of bits for the biggest coefficient in the objective function 1
Sum of the numbers in the objective function 200
Number of bits of the sum of numbers in the objective function 8
Biggest number in a constraint 2
Number of bits of the biggest number in a constraint 2
Biggest sum of numbers in a constraint 200
Number of bits of the biggest sum of numbers8
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.040993
Number of variables200
Total number of constraints700
Number of constraints which are clauses696
Number of constraints which are cardinality constraints (but not clauses)0
Number of constraints which are nor clauses,nor cardinality constraints4
Minimum length of a constraint2
Maximum length of a constraint3

Trace number 4238

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc13 THE 2005-04-13 16:14:43 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=810 boxname=wulflinc13 idbench=90 idsolver=9 numberseed=0
MD5SUM SOLVER: daf345f6fbf228671abfac48013b9cac  /oldhome/oroussel/solvers/sat4jPseudo.jar
MD5SUM BENCH:  b52c079073d6fbecb53bdc15d0413f75  /oldhome/oroussel/tmp/wulflinc13/normalized-aim-100-6_0-yes1-4.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudo.jar /oldhome/oroussel/tmp/wulflinc13/normalized-aim-100-6_0-yes1-4.opb
IDLAUNCH: 810
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.242
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.242
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 901.12

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        936876 kB
Buffers:         32484 kB
Cached:          45596 kB
SwapCached:        392 kB
Active:          42732 kB
Inactive:        38540 kB
HighTotal:      131008 kB
HighFree:        81592 kB
LowTotal:       903652 kB
LowFree:        855284 kB
SwapTotal:     2097136 kB
SwapFree:      2096744 kB
Dirty:              40 kB
Writeback:           0 kB
Mapped:           6928 kB
Slab:            10884 kB
Committed_AS:    63472 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-04-13 16:14:51 (client local time) WITH STATUS 30 IN  SECONDS
stats: 810 0  30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c solving /oldhome/oroussel/tmp/wulflinc13/normalized-aim-100-6_0-yes1-4.opb
c reading problem 
c [nbvar=200]
c [nbconstr=700]
c time 1.386
c #vars     200
c #clauses  700
c starts	: 0
c conflicts	: 0
c decisions	: 0
c propagations	: 0
c inspects	: 0
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 0
c SATISFIABLE
c OPTIMIZING...
c 
c CURRENT OPTIMUM=100
c Current CPU time (ms) : 4.841
c starts	: 1
c conflicts	: 52
c decisions	: 91
c propagations	: 2112
c inspects	: 6903
c learned literals	: 1
c learned binary clauses	: 4
c learned ternary clauses	: 6
c learned clauses	: 51
c root simplifications	: 3
c Total CPU time (ms) : 6.542
c 
s OPTIMUM FOUND
v x1 -x2 -x3 x4 x5 -x6 x7 -x8 x9 -x10 -x11 x12 -x13 x14 -x15 x16 -x17 x18 -x19 x20 -x21 x22 -x23 x24 -x25 x26 x27 -x28 -x29 x30 -x31 x32 -x33 x34 x35 -x36 x37 -x38 -x39 x40 x41 -x42 -x43 x44 -x45 x46 x47 -x48 x49 -x50 -x51 x52 x53 -x54 x55 -x56 x57 -x58 x59 -x60 x61 -x62 -x63 x64 -x65 x66 x67 -x68 -x69 x70 -x71 x72 x73 -x74 x75 -x76 -x77 x78 -x79 x80 -x81 x82 -x83 x84 -x85 x86 -x87 x88 x89 -x90 -x91 x92 -x93 x94 -x95 x96 x97 -x98 x99 -x100 -x101 x102 -x103 x104 x105 -x106 x107 -x108 -x109 x110 -x111 x112 -x113 x114 -x115 x116 x117 -x118 -x119 x120 -x121 x122 -x123 x124 -x125 x126 x127 -x128 x129 -x130 x131 -x132 x133 -x134 -x135 x136 -x137 x138 x139 -x140 -x141 x142 x143 -x144 x145 -x146 -x147 x148 x149 -x150 x151 -x152 -x153 x154 x155 -x156 x157 -x158 x159 -x160 -x161 x162 x163 -x164 -x165 x166 -x167 x168 -x169 x170 x171 -x172 -x173 x174 -x175 x176 x177 -x178 -x179 x180 -x181 x182 x183 -x184 x185 -x186 -x187 x188 -x189 x190 -x191 x192 -x193 x194 x195 -x196 -x197 x198 x199 -x200 
c objectif function=100
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 0.86 0.94 0.73 2/54 31214
Raw data (stat): 31214 (runsolver) R 31213 30701 30700 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 419091867 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+7.47124 s]
Raw data (loadavg): 1.03 0.97 0.75 1/53 31226
Raw data (stat): 31214 (runsolver) R 31213 30701 30700 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 419091867 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 7.47092
CPU time (s): 9.82251
CPU user time (s): 9.50955
CPU system time (s): 0.312952
CPU usage (%): 131.477
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	100
#### END VERIFIER DATA ####