Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/manquinho/primes-dimacs-cnf/normalized-aim-100-2_0-yes1-4.opb
MD5SUMff832af0c00ca95993ddf1539575f98d
Bench Categoryoptimization, small integers (OPTSMALLINT)
Has Objective FunctionYES
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 100
Optimality of the best value was proved NO
Number of terms in the objective function 200
Biggest coefficient in the objective function 1
Number of bits for the biggest coefficient in the objective function 1
Sum of the numbers in the objective function 200
Number of bits of the sum of numbers in the objective function 8
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 200
Number of bits of the biggest sum of numbers8
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.024995
Number of variables200
Total number of constraints300
Number of constraints which are clauses300
Number of constraints which are cardinality constraints (but not clauses)0
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint2
Maximum length of a constraint3

Trace number 4228

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc19 THE 2005-04-13 16:14:36 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=738 boxname=wulflinc19 idbench=82 idsolver=9 numberseed=0
MD5SUM SOLVER: daf345f6fbf228671abfac48013b9cac  /oldhome/oroussel/solvers/sat4jPseudo.jar
MD5SUM BENCH:  ff832af0c00ca95993ddf1539575f98d  /oldhome/oroussel/tmp/wulflinc19/normalized-aim-100-2_0-yes1-4.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudo.jar /oldhome/oroussel/tmp/wulflinc19/normalized-aim-100-2_0-yes1-4.opb
IDLAUNCH: 738
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.037
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 890.88

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 3
cpu MHz		: 451.037
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        914468 kB
Buffers:         30692 kB
Cached:          55884 kB
SwapCached:         56 kB
Active:          37756 kB
Inactive:        51744 kB
HighTotal:      131008 kB
HighFree:        71120 kB
LowTotal:       903652 kB
LowFree:        843348 kB
SwapTotal:     2097892 kB
SwapFree:      2097836 kB
Dirty:              36 kB
Writeback:           0 kB
Mapped:           7028 kB
Slab:            25068 kB
Committed_AS:    63700 kB
PageTables:        328 kB
VmallocTotal:   114680 kB
VmallocUsed:      1368 kB
VmallocChunk:   113252 kB
JOB ENDED THE 2005-04-13 16:14:41 (client local time) WITH STATUS 30 IN  SECONDS
stats: 738 0  30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c solving /oldhome/oroussel/tmp/wulflinc19/normalized-aim-100-2_0-yes1-4.opb
c reading problem 
c [nbvar=200]
c [nbconstr=300]
c time 0.737
c #vars     200
c #clauses  300
c starts	: 0
c conflicts	: 0
c decisions	: 0
c propagations	: 0
c inspects	: 0
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 0
c SATISFIABLE
c OPTIMIZING...
c 
c CURRENT OPTIMUM=100
c Current CPU time (ms) : 2.494
c starts	: 1
c conflicts	: 28
c decisions	: 87
c propagations	: 1259
c inspects	: 2034
c learned literals	: 0
c learned binary clauses	: 2
c learned ternary clauses	: 16
c learned clauses	: 28
c root simplifications	: 1
c Total CPU time (ms) : 4.346
c 
s OPTIMUM FOUND
v -x1 x2 x3 -x4 -x5 x6 x7 -x8 -x9 x10 -x11 x12 x13 -x14 x15 -x16 -x17 x18 x19 -x20 x21 -x22 -x23 x24 -x25 x26 -x27 x28 x29 -x30 -x31 x32 -x33 x34 x35 -x36 -x37 x38 x39 -x40 -x41 x42 -x43 x44 -x45 x46 x47 -x48 -x49 x50 -x51 x52 x53 -x54 -x55 x56 -x57 x58 -x59 x60 -x61 x62 x63 -x64 -x65 x66 -x67 x68 x69 -x70 x71 -x72 -x73 x74 -x75 x76 -x77 x78 -x79 x80 x81 -x82 x83 -x84 x85 -x86 x87 -x88 x89 -x90 -x91 x92 -x93 x94 -x95 x96 x97 -x98 -x99 x100 -x101 x102 x103 -x104 -x105 x106 x107 -x108 x109 -x110 -x111 x112 x113 -x114 x115 -x116 x117 -x118 x119 -x120 x121 -x122 -x123 x124 x125 -x126 -x127 x128 -x129 x130 x131 -x132 -x133 x134 -x135 x136 -x137 x138 -x139 x140 x141 -x142 x143 -x144 x145 -x146 x147 -x148 x149 -x150 x151 -x152 -x153 x154 x155 -x156 -x157 x158 -x159 x160 -x161 x162 -x163 x164 -x165 x166 -x167 x168 x169 -x170 x171 -x172 -x173 x174 -x175 x176 -x177 x178 -x179 x180 x181 -x182 x183 -x184 -x185 x186 -x187 x188 -x189 x190 -x191 x192 x193 -x194 -x195 x196 x197 -x198 -x199 x200 
c objectif function=100
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 0.99 0.97 0.74 2/55 23344
Raw data (stat): 23344 (runsolver) R 23343 22929 22928 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 477304044 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+5.49085 s]
Raw data (loadavg): 1.07 0.99 0.75 1/54 23356
Raw data (stat): 23344 (runsolver) R 23343 22929 22928 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 477304044 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 5.49055
CPU time (s): 6.18506
CPU user time (s): 5.97309
CPU system time (s): 0.211967
CPU usage (%): 112.649
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	100
#### END VERIFIER DATA ####