Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/aloul/FPGA_SAT05/normalized-fpga10_10_sat_pb.cnf.cr.opb
MD5SUM5a251e27b2dc8cbc7d3f3836a6772e10
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableYES
(Un)Satisfiability was provedYES
Best value of the objective function 0
Optimality of the best value was proved NO
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 11
Number of bits of the biggest sum of numbers4
Best result obtained on this benchmarkSAT
Best CPU time to get the best result obtained on this benchmark0.044992
Number of variables150
Total number of constraints130
Number of constraints which are clauses110
Number of constraints which are cardinality constraints (but not clauses)20
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint5
Maximum length of a constraint10

Trace number 4165

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc1 THE 2005-04-13 15:52:13 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=9 boxname=wulflinc1 idbench=1 idsolver=9 numberseed=0
MD5SUM SOLVER: daf345f6fbf228671abfac48013b9cac  /oldhome/oroussel/solvers/sat4jPseudo.jar
MD5SUM BENCH:  5a251e27b2dc8cbc7d3f3836a6772e10  /oldhome/oroussel/tmp/wulflinc1/normalized-fpga10_10_sat_pb.cnf.cr.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudo.jar /oldhome/oroussel/tmp/wulflinc1/normalized-fpga10_10_sat_pb.cnf.cr.opb
IDLAUNCH: 9
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.053
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 888.83

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 451.053
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        876120 kB
Buffers:         39460 kB
Cached:          94840 kB
SwapCached:          0 kB
Active:         101296 kB
Inactive:        36628 kB
HighTotal:      131008 kB
HighFree:        42756 kB
LowTotal:       903652 kB
LowFree:        833364 kB
SwapTotal:     2097136 kB
SwapFree:      2097136 kB
Dirty:              16 kB
Writeback:           0 kB
Mapped:           8436 kB
Slab:            14952 kB
Committed_AS:    96700 kB
PageTables:        388 kB
VmallocTotal:   114680 kB
VmallocUsed:      1388 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-04-13 15:52:23 (client local time) WITH STATUS 30 IN  SECONDS
stats: 9 0  30
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c solving /oldhome/oroussel/tmp/wulflinc1/normalized-fpga10_10_sat_pb.cnf.cr.opb
c reading problem 
c [nbvar=150]
c [nbconstr=130]
c time 0.633
c #vars     150
c #clauses  130
c starts	: 0
c conflicts	: 0
c decisions	: 0
c propagations	: 0
c inspects	: 0
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 0
c SATISFIABLE
c OPTIMIZING...
c 
c CURRENT OPTIMUM=0
c Total CPU time (ms) : 7.597
c 
s OPTIMUM FOUND
v -v30 -v146 -v147 -v148 -v149 v150 -v80 v39 v141 -v142 -v143 -v144 -v145 -v27 -v131 -v132 -v133 v134 -v135 -v18 -v136 v137 -v138 -v139 -v140 -v11 -v12 v13 -v14 -v15 -v16 -v17 -v19 -v20 -v40 v81 -v82 -v83 -v84 -v85 -v86 -v87 -v88 -v89 -v90 -v49 -v93 v111 -v112 -v113 -v114 -v115 -v73 -v21 -v101 -v102 -v103 -v104 v105 -v7 -v106 -v107 -v108 v109 -v110 -v75 -v121 -v122 v123 -v124 -v125 -v65 -v9 -v35 -v99 -v31 -v61 -v8 -v24 -v116 v117 -v118 -v119 -v120 v22 -v23 -v25 -v26 -v28 -v29 -v52 -v78 -v70 -v45 -v50 v97 -v126 -v127 v128 -v129 -v130 -v1 -v2 -v3 -v4 v5 -v6 -v10 -v62 -v36 -v32 -v46 -v55 -v33 -v58 -v96 -v98 -v79 -v59 -v37 -v63 -v64 -v66 -v67 v68 -v69 -v47 -v91 v44 v76 -v34 -v38 -v92 -v94 -v95 -v100 -v54 -v72 -v53 -v57 -v41 -v42 -v43 -v48 v60 -v71 -v74 -v77 -v51 -v56 
c objectif function=0
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 0.00 0.02 0.04 2/59 12494
Raw data (stat): 12494 (runsolver) R 12493 12452 12451 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 362098542 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+8.71237 s]
Raw data (loadavg): 0.24 0.07 0.05 1/58 12506
Raw data (stat): 12494 (runsolver) R 12493 12452 12451 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 362098542 1052672 99 4294967295 134512640 135381576 3221224432 3221219680 135158418 0 2147483391 7 90112 0 0 0 17 0 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 30
Real time (s): 8.71202
CPU time (s): 9.25359
CPU user time (s): 8.87565
CPU system time (s): 0.377942
CPU usage (%): 106.216
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
Verifier:	OK	0
#### END VERIFIER DATA ####