Some explanations

A solver is run under the control of another program named runsolver. runsolver is in charge of imposing the CPU time limit and the memory limit to the solver. It also monitors some information about the process. The trace of the execution of a solver is divided in four parts:
  1. LAUNCHER DATA
    These informations are related to the script which will launch the solver. The most important informations are the command line given to the solver, the md5sum of the different files and the dump of the /proc/cpuinfo and /proc/meminfo which provide some useful information on the computer.
  2. SOLVER DATA
    This is the output of the solver (stdout and stderr).
  3. WATCHER DATA
    This is the informations gathered by the runsolver program. It first prints the different limits. There's a first limit on CPU time set to 1200 seconds. After this time has ellapsed, runsolver sends a SIGTERM and 2 seconds later a SIGKILL to the solver. For safety, there's also another limit set to 1230 seconds which will send a SIGXPU to the solver. The last limit is on the virtual memory used by the process (900Mb).
    Every ten seconds, the runsolver process fetches the content of /proc/loadavg, /proc/pid/stat and /proc/pid/statm (see man proc) and prints it as raw data. This is only recorded in case we need to investigate the behaviour of a solver. The memory used by the solver (vsize) is also given every ten seconds.
    When the solver exits, runsolver prints some informations such as status and time. CPU usage is the ratio CPU Time/Real Time.
  4. VERIFIER DATA
    The output of the solver is piped to a verifier program which will search a value line "v " and, if found, will check that the given interpretation satisfies all constraints.

General information on the benchmark

Namenormalized-opb/submitted/aloul/FPGA_SAT05/normalized-chnl15_20_pb.cnf.cr.opb
MD5SUMce39bf71367df072c91f9b7587480c93
Bench Categoryno optimization function (SAT)
Has Objective FunctionNO
SatisfiableNO
(Un)Satisfiability was proved
Best value of the objective function
Optimality of the best value was proved
Number of terms in the objective function 0
Biggest coefficient in the objective function 0
Number of bits for the biggest coefficient in the objective function 0
Sum of the numbers in the objective function 0
Number of bits of the sum of numbers in the objective function 0
Biggest number in a constraint 1
Number of bits of the biggest number in a constraint 1
Biggest sum of numbers in a constraint 21
Number of bits of the biggest sum of numbers5
Best result obtained on this benchmarkUNSAT
Best CPU time to get the best result obtained on this benchmark0.017996
Number of variables600
Total number of constraints70
Number of constraints which are clauses40
Number of constraints which are cardinality constraints (but not clauses)30
Number of constraints which are nor clauses,nor cardinality constraints0
Minimum length of a constraint15
Maximum length of a constraint20

Trace number 29016

#### BEGIN LAUNCHER DATA ####
LAUNCH ON wulflinc15 THE 2005-05-25 04:39:37 (client local time)
PB2005-SCRIPT v4.0 
MARKUPS: idlaunch=20416 boxname=wulflinc15 idbench=6 idsolver=14 numberseed=0
MD5SUM SOLVER: d29da23ec752be69e0579424c0f0767e  /oldhome/oroussel/solvers/sat4jPseudoBis.jar
MD5SUM BENCH:  ce39bf71367df072c91f9b7587480c93  /oldhome/oroussel/tmp/wulflinc15/normalized-chnl15_20_pb.cnf.cr.opb
REAL COMMAND:  java -server -Xms650M -Xmx650M -jar /oldhome/oroussel/solvers/sat4jPseudoBis.jar /oldhome/oroussel/tmp/wulflinc15/normalized-chnl15_20_pb.cnf.cr.opb
IDLAUNCH: 20416
/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 450.999
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 890.88

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 7
model name	: Pentium III (Katmai)
stepping	: 2
cpu MHz		: 450.999
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 899.07

/proc/meminfo:
MemTotal:      1034660 kB
MemFree:        854364 kB
Buffers:         14908 kB
Cached:         143880 kB
SwapCached:        672 kB
Active:          40992 kB
Inactive:       119896 kB
HighTotal:      131008 kB
HighFree:         7224 kB
LowTotal:       903652 kB
LowFree:        847140 kB
SwapTotal:     2097136 kB
SwapFree:      2095624 kB
Dirty:              40 kB
Writeback:           0 kB
Mapped:           5076 kB
Slab:            13776 kB
Committed_AS:    63600 kB
PageTables:        316 kB
VmallocTotal:   114680 kB
VmallocUsed:      1364 kB
VmallocChunk:   113256 kB
JOB ENDED THE 2005-05-25 04:39:39 (client local time) WITH STATUS 20 IN 3.40648 SECONDS
stats: 20416 7 3.40648 20
#### END LAUNCHER DATA ####
#### BEGIN SOLVER DATA ####
c SAT4J: a SATisfiability library for Java (c) 2004-2005 Daniel Le Berre
c This is free software under the GNU LGPL licence. See www.sat4j.org for details.
c version Special PB05 Second trial
c --- Begin Solver configuration ---
c org.sat4j.minisat.uip.FirstUIP@1e4cbc4
c org.sat4j.minisat.constraints.PBMinDataStructure@1fdc96c
c org.sat4j.minisat.learning.MiniSATLearning@b2fd8f
c conflictBoundIncFactor=1.5 learntBoundIncFactor=1.1 initLearntBoundConstraintFactor=0.5 initConflictBound=100 
c 
c --- End Solver configuration ---
c solving /oldhome/oroussel/tmp/wulflinc15/normalized-chnl15_20_pb.cnf.cr.opb
c reading problem ... done. Time 0.677 ms.
c #vars     600
c #constraints  70
c starts	: 1
c conflicts	: 1
c decisions	: 200
c propagations	: 545
c inspects	: 188
c learned literals	: 0
c learned binary clauses	: 0
c learned ternary clauses	: 0
c learned clauses	: 0
c root simplifications	: 1
s UNSATISFIABLE
c Total CPU time (ms) : 1.428
#### END SOLVER DATA ####
#### BEGIN WATCHER DATA ####
Enforcing CPU limit (will send SIGTERM then SIGKILL): 1200 seconds
Enforcing CPUTime (will send SIGXCPU) limit: 1230 seconds
Enforcing VSIZE limit: 943718400 bytes
Raw data (loadavg): 1.05 1.00 0.92 2/54 4914
Raw data (stat): 4914 (runsolver) R 4913 23514 23513 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 777839678 1052672 99 4294967295 134512640 135381576 3221224400 3221219620 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 1028
[startup+2.42759 s]
Raw data (loadavg): 1.05 1.00 0.92 1/53 4925
Raw data (stat): 4914 (runsolver) R 4913 23514 23513 0 -1 64 4 0 0 0 0 0 0 0 19 0 1 0 777839678 1052672 99 4294967295 134512640 135381576 3221224400 3221219620 135158418 0 2147483391 7 90112 0 0 0 17 1 0 0
Raw data (statm): 257 99 215 215 0 42 0
vsize: 0

Child status: 20
Real time (s): 2.42727
CPU time (s): 3.40648
CPU user time (s): 3.24851
CPU system time (s): 0.157975
CPU usage (%): 140.342
Max. virtual memory (Kb): 1028
#### END WATCHER DATA ####
#### BEGIN VERIFIER DATA ####
ERROR: no interpretation found !
#### END VERIFIER DATA ####